Advertisement
How to use the ion steamer
1
1
Insert the plug into a power outlet and press the
switch.
Only the "
" lamp blinks.
●
Push the "
it further. If the switch is not pushed far enough, the "
switch will return, and the power will not turn on.)
2
2
Press the
Each time you press the "
course changes from "Clear skin", "Skin fitness/Elasticity", "Sebum
care" and "Hot steam".
●
The lamp blinks until the selected course starts.
●
Refer to "Recommended basic patterns" on page 25.
3
3
Press the
The course indication lamp or the "
on.
The micro sized ion steam is released after about 30 seconds.
●
Steam and mist are released alternately according to the selected
course.
●
Since the steam and mist are released from different outlets,
position your face for uniform exposure to the steam and mist.
●
When an appliance releases steam, some hot water drops may
come out. This is normal.
●
The mist is not released in the Hot steam course.
●
Press the "
selected course to interrupt the course. Press the "
(stop/start) switch once more to start the course again from the
beginning.
●
Press the "
course to start the switched course from the beginning.
4
4
Adjust the angle (up/down) of the nozzle.
●
Adjust the angle by holding both
edges of the nozzle cap while
taking care not to touch the steam
directly.
5
5
Once the selected course
has been completed, the appliance stops automatically.
●
Only the Clear skin course indication blinks.
" (power) switch firmly. (Even if a click is heard, push
switch to select your favorite course.
" (course selection) switch, the
switch to start the selected course.
" (stop/start) switch in the middle of the
" (course selection) switch in the middle of the
" (power)
" (hot steam) lamp turns
"
21
Advertisement
