Interval Recording; Frame By Frame Recording - Cut Recording - Sony DCR-PC6E Service Manual

Interval recording

You can make a time-lapse recording by setting
the camcorder to automatically record and
standby sequentially. You can achieve an
excellent recording for flowering, emergence,
etc., with this function.
Example/
1 s
9 min 59 s
[a]
[b]
10 min
[a] Recording time
[b]Waiting time
(1) In standby mode, press FN to display PAGE1.
(2) Press MENU, then set INT. REC to SET in
in the menu settings, then press EXEC (p.
134).
(3) Set INTERVAL and REC TIME.
1 Press r/R to select INTERVAL, then press
EXEC.
2 Press r/R to select the desired interval
time, then press EXEC.
The time: 30SEC y 1MIN y 5MIN y
10MIN
3 Press r/R to select REC TIME, then
press EXEC.
4 Press r/R to select the desired recording
time, then press EXEC.
The time: 0.5SEC y 1SEC y 1.5SEC y
2SEC
5 Press RET.
78
Interval recording
To cancel the interval recording
Perform either of the following:
– Set INT. REC to OFF in the menu settings.
– Set the POWER switch to OFF (CHARGE), VCR
(DCR-PC9E)/PLAYER (DCR-PC6E) or
MEMORY (DCR-PC9E only).
To perform normal recording during
the interval recording
Press START/STOP. The INTERVAL indicator
flashes, and you can perform normal recording
only once. To return to interval recording, stop
normal recording, and press START/STOP
again. The INTERVAL indicator stops flashing
and lights up, and the recording time for interval
recording is started.
Note on interval recording (DCR-PC9E only)
You cannot do interval recording in memory
mode.
On recording time
There may be a discrepancy in recording time of
up to +/– 6 frames from the selected time.
80
1 s
9 min 59 s
[a]
[b]
10 min
[a]
[b]
(1)
(2)
(3)
r R
1
r R
2
y y y
r R
3
r R
4
y y y
5
1-18
Interval recording
3
1
CAMERA SET
EXIT
I NT. REC
I NTERVAL 30SEC
REC T I ME
EXEC RET.
3
CAMERA SET EXIT
I NT. REC
I NTERVAL
REC T I ME 0 . 5SEC
EXEC RET.
(4) Set INT. REC to ON, then press EXEC.
(5) Press EXIT to return to FN.
The INTERVAL indicator flashes on the
screen
(6) Press START/STOP to start interval
recording.
The interval recording indicator lights up.
Frame by frame
recording
– Cut recording
You can make a recording with a stop-motion
animated effect using cut recording. To create
this effect, alternately move the subject a little
and make a cut recording. We recommend that
you use a tripod, and operate the camcorder
using the Remote Commander after step 4.
(1) In standby mode, press FN to display PAGE1.
(2) Press MENU, then set FRAME REC to ON in
in the menu setting (p. 134).
(3) Press EXIT to return to FN.
The FRAME REC indicator lights up.
(4) Press START/STOP to start cut recording.
The camcorder makes a recording for about
six frames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
1
FN
2
CAMERA SET
D ZOOM
16 : 9WIDE
STEADYSHOT
N. S. LIGHT
FRAME REC
INT. REC
EDITSEARCH
EXEC
To cancel the cut recording
Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA
mode.
Note
The proper remaining tape time is not indicated
if you use this function continuously.
When using the cut recording function
The last recorded cut is longer than other cuts.
2
CAMERA SET
EXIT
I NT. REC
I NTERVAL 30SEC
REC T I ME 1M I N
5M I N
10M I N
EXEC RET.
4
CAMERA SET EXIT
I NT. REC
I NTERVAL
REC T I ME 0 . 5SEC
1SEC
1 . 5SEC
2SEC
EXEC RET.
(4)
(5)
(6)
4
CAMERA SET
EXIT
D ZOOM
16 : 9W I DE
STEADYSHOT
N.S. LIGHT
FRAME REC
I NT. REC ON
EDITSEARCH
EXEC RET.
(1)
(2)
(3)
(4)
(5)
EXIT
STBY
OFF
ON
RET.
79
81