Yamaha DRX-2 Service Manual page 75

Nucleus Name DS_SYS_DisplayFatalGet
Nucleus Number 1225
Description Get the display-fatal flag of the recorder
Technical - Issue the command to get the status of the display-fatal functionality to the analog board
- Wait for the result and return this to the user
Execution Time Less than 1 second.
User Input None
Error Number
122500
122501
122502
122503
122504
Example DS:> 1225
122500:
Test OK @
Nucleus Name DS_SYS_SettingsSet
Nucleus Number 1226
Description Programs the digital board settings into the boot EEPROM on the digital board.
Technical - Evaluate user input.
- Setup IIC-bus.
- Writedata to boot EEPROM.
- Update checksum.
Execution Time 1 second
User Input A large hexadecimal value that represents the digital board settings obtained from the
DbString.exe program or from a reference set.
Error Number
122600
122601
122602
Example DS:> 1226 646961677473746201010200010101010101000020080000
122600:
Test OK @
Description
Getting the display-fatal flag succeeded
Getting the display-fatal flag failed
The returned errorcode from the analog board is unknown:
No DS errCode known for analog board error:
There was no response from the analog board.
Description
The settings were successfully programmed.
User input is invalid.
IIC access failed.
DRX-2
75