HP EliteDesk 800 G2 Desktop Mini Hardware Reference Manual page 25

9. To install a HDD, you must transfer the silver and blue isolation mounting guide screws from the old HDD
to the new HDD.
10. Align the guide screws with the slots on the chassis drive cage, press the HDD down into the cage, then
slide it forward until it stops and locks in place (1).
11. Connect the HDD power and data cable (2) to the HDD.
12. Replace the access panel.
13. If the computer was on a stand, replace the stand.
14. Plug in the AC power cord and turn on the computer.
15. Lock any security devices that were disengaged when the access panel was removed.
Removing and replacing a hard disk drive (HDD) 19