Conditions For Documents To Scan (For Ix500, S1500 Or S1500M) - Fujitsu scansnap sv600 Operation Manual

Conditions for Documents to Scan (For iX500, S1500 or S1500M)

iX500
Document type Office paper, postcards, business cards
Plastic cards conforming to the ISO781A ID-1
type (54 × 86 mm/2.1 × 3.4 in.)
Paper weight
40 to 209 g/m
l Long page documents
52 to 127 g/m
l A8 size (52 × 72 mm) or less
127 to 209 g/m
l Plastic cards
0.76 mm (0.03 in.) or less (embossed cards
can be used)
Paper size Width: 50.8 to 216 mm (2 to 8.5 in.)
Length: 50.8 to 360 mm (2 to 14.17 in.)
l For long page (*1)
216 × 863 mm (8.5 × 34 in.)
*1: Scanning starts when you hold down the [Scan] button on the ScanSnap for 3 seconds or longer.
ATTENTION
l The following types of documents must not be scanned:
- Documents attached with the metals such as paper clips or staples that can damage the inside
of the ScanSnap
Remove the metals for scanning.
- Documents on which the ink is still wet
Wait until the ink dries completely to scan these documents.
- Documents larger than width 216 mm (8.5 in.), length 863 mm (34 in.)
- Documents other than paper such as fabric, metal foil and OHP film
l When you scan picture postcards, be aware that the picture side may get damaged. It is the
responsibility of the customer to scan picture postcards.
l When you scan plastic cards, in [Multifeed Detection] of the [Paper] tab of the
Window" (page 44), select [None] or [Check Length].
l Be careful of the following when you scan plastic cards:
- Cards that are bent may not be fed properly.
- If the surface of the card is dirty with grease marks such as fingerprints, perform scanning after
wiping the dirt off.
- When you scan plastic cards with strong luster, some parts of the image may appear lighter or
darker than the original.
Example: gold colored credit card
- When you scan embossed cards, put the embossed side down, and insert the card in
landscape orientation.
- If the embossed characters are not coated in gold or silver and the background color of the card
and the color of the embossed characters are similar, it may be difficult for the ScanSnap to
recognize embossed characters.
In which case, performing the following may result in an improvement.
2
(10.7 to 55.7 lb)
2
(13.9 to 33.9 lb)
2
(33.9 to 55.7 lb)
142
Documents for Scanning (For iX500, S1500 or S1500M)
S1500/S1500M
Office paper, postcards, business cards
2
52 to 127 g/m (13.9 to 33.9 lb)
"ScanSnap Setup