Advanced Operations; Alls - Kenwood NEXEDGE NX-200 Instruction Manual

dtmF (d
uAl
■ Making a DTMF Call
Note: DTMF calls can be made only in analog operation.
Manual Dialing (Keypad Models Only)
1 Press and hold the PTT switch.
2 Enter the desired digits using the DTMF keypad.
• If you release the PTT switch, transmit mode will end even
if the complete number has not been sent.
• If the Keypad Auto PTT function has been enabled by your
dealer, you do not need to press the PTT swich to transmit;
you can make the call simply pressing the DTMF keys.
Store & Send
1 Press the key programmed as Autodial.
2 Enter up to 30 digits using the DTMF keypad.
• Alternatively, you can enter digits by using
{page 4}.
3 Press the PTT switch to make the call.
■ Autodial
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as Autodial, or access the
Menu {page 2}.
• The first entry in the Autodial list appears on the display.
2 Press
number, or enter the list number directly (0 ~ 32).
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
20

ADVANCED OPERATIONS

t m F
one ulti requency
/ to select your desired Autodial list
) c

AllS

/