Pet Hair Brushroll Removal And Replacement - Kenmore 592.30413 Use & Care Manual

PET HAIR BRUSHROLL REMOVAL AND REPLACEMENT

WARNING
Electrical Shock and Personal Injury
Hazard.
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
Lay cleaner flat and flip cleaner to expose
nozzle base. Base should lay flat and
face up. To remove nozzle guard, remove
6 screws.
Rotate/pivot the nozzle guard and pull off
Grasp Pet Hair Brushroll at both ends
and lift.
DJ68-00514A-00.indd 16
Nozzle Guard
Pet Hair Brushroll
Clean strings, hair and other debris from
Pet Hair Brushroll, paying particular
attention to Brushroll ends.
Replace the cleaned Pet Hair Brushroll
down into both end slots as shown.
②
Reposition Nozzle Guard and screw or
snap back into place.
Check to be sure all screws or latches
are secured.
16
①
2009.8.22 9:19:54 AM