8.4.1.2 Delay Jam for the Pickup Unit
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The leading edge of paper does not reach the sensor after the cassette 1/2 pickup motor has started to rotate.
Or, in the case that the paper leading edge does not reach to the sensor within specified time after turning on the manual feeder pickup clutch
Pickup motor / Manual
feeder pickup clutch
Jam check
Sensor N
Source of paper
Cassette 1
Cassette 2
Manual feeder
8.4.2 Stationary Jams
8.4.2.1 Common Stationary Jam
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The sensor N does not go off within a specific length of time after the sensor has gone on.
Jam Check
Sensor N
8.4.2.2 Stationary Jam at Power-On
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The machine makes a check to see that there is no paper over the following sensors before it starts initial multiple rotation at power-on:
Start key ON
or PRINT set
[1]
Motor/Clutch
cassette 1 pickup motor (M4)
cassette 2 pickup motor (M5)
Manual feeder pickup clutch (CL5)
Start key ON
or PRINT set
L + A
Normal
(L =paper length feed distance A = specific feed length)
Sensor
Cassette 1 retry sensor (PS25)
Cassette 2 retry sensor (PS26)
Pre-registration sensor (PS7)
Inside delivery sensor (PS1)
No. 1 delivery sensor (PS27)
Duplex paper sensor (PS10)
Sensor
Cassette 1 retry sensor (PS25)
Cassette 2 retry sensor (PS26)
Pre-registration sensor (PS7)
Inside delivery sensor (PS1)
No. 1 delivery sensor (PS27)
Duplex paper sensor (PS10)
INTR
/
PRINT
[1]
Normal
[1]:specific length of feed in time
F-8-14
Manual feeder paper present/absent sensor (PS9)
INTR
/
PRINT
L + A
Error
F-8-15
Error
Sensor
cassette 1 retry sensor (PS25)
cassette 2 retry sensor (PS26)
Chapter 8
0014-0308
0014-0310
0014-0311
8-13