70
en | On-Screen Display (OSD) Menus (Pelco Protocol)
9.5
Other Menus
Menu
Edit Password
FastAddress
Software Version
Ack and Reset Alarms
Restore All Settings
Reset All Memory
2016.03 | 2.1 | F.01U.249.416
Description
Sets or displays the password. See Setting Passwords,
page 38.
Sets or changes the address.
Displays the camera software version.
Acknowledges and resets alarms. If there is no active
alarm input, the OSD displays the following message:
"No Active Alarms."
Restores all settings to their original factory default
settings.
Restores all settings to their original factory default
settings and clears all user programmed settings such
as preset scenes and recordings.
Operation Manual
MIC612 Thermal Camera
Default
Setting
Not Set
Bosch Security Systems