Motorola Communications Gateway User Manual page 28

Introduction Before You Begin
Home Print
Installation & Configuration
Setting Up a USB Driver in Windows 98 SE, continued
4
Be sure "CD-ROM drive" is the only box checked, as in the window at top left.
5
Click Next.
If your computer successfully locates the driver, you can skip to step 8.
6
If your computer does not locate the driver, the previous window is displayed again.
Select Specify a location and type the location of your CD-ROM drive as shown at
bottom left.
To load the driver successfully, you may need to click Browse to manually select the
NetMotCM.sys file on the CD-ROM.
7
Click Next.
X
Exit
Troubleshooting
23
Communications Gateway User Guide
FAQ Glossary
License