Certified Product Summary; Service Information - Motorola RFS6000 Configuration Manual

Introduction

Certified Product Summary

Manufacturer:
Approved products:
RF technology:
Radio:
Security:
AP and WLC software version certified:
SpectraLink handset models certified: **
SpectraLink handset software certified:
SpectraLink radio mode:
Maximum telephone calls tested per AP:
Network topology:
Denotes products directly used in VIEW Certification testing.
†
* Maximum calls tested during VIEW Certification. The certified product may actually support a higher
number of maximum calls for 802.11a and 802.11g radio modes.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified
with the WLAN hardware and software identified in the table. Throughout the remainder of this
document they will be referred to collectively as "SpectraLink Wireless Telephones".

Service Information

PN: 1725-36197-001_A.doc
Polycom's Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink 8020/8030 Wireless Telephones
and WLAN infrastructure products.
The products listed below have been thoroughly tested in Polycom's
lab using the VIEW Certification Test Plan. This document details
how to configure the RFS6000 Wireless Switch and the AP300 access
point (AP) to best support SpectraLink 8020/8030 Wireless
Telephones.
Motorola
RFS6000 Wireless Switch with AP300
802.11a/b/g
2.4 GHz (802.11b/g), 5 GHz (802.11a)
WPA-PSK, WPA2-PSK
3.3.1.0-003R
e340/h340/i640
89.135 or greater
802.11b
Switched Ethernet (recommended)
If you encounter difficulties or have questions regarding the
configuration process, please contact Motorola technical support at
(800) 653-5350, or at
http://www.symbol.com/services/contactsupport.
Motorola: RFS6000 Wireless Switch with AP300
122.021 or greater
802.11b
12 12
†
†
8020/8030
802.11a
12*
3