Configuring For Tcp/Ip In Windows 2000 - Motorola SURFboard SB4200 User Manual

Introduction Before You Begin
Home Print
Installation

Configuring for TCP/IP in Windows 2000

The following basic instructions are for Windows 2000 users. Windows 95, 98, and Me
instructions begin on page 23. If you are using a different operating system, refer to your
user guide.
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network and Dial-up Connections icon on the Control Panel
window.
4
On the Network and Dial-up Connections window, click Local Area Connection #.
The value of this number (#) varies from system to system, but usually is 2. The
Local Area Connection # Status window is displayed as shown at the top of the next
page.
X
Exit
Configuration
26
Troubleshooting Legal