Motorola BRAVO PLUS User Manual

A
BRAVO PLUS
User's Guide
On/Off Switch – This three-position slide switch is used to
turn the pager on and off, acts as a master reset button,
and activates the backlight.
Alert Lamp – Flashes to give a visual indication when a
message is received.
TURNING THE PAGER ON
SILENT Mode: Slide the On/Off Switch in an upward direc-
$
tion to the SILENT symbol ( ). The pager vibrates (if
equipped) and the lamp flashes for 4 seconds.
ON Mode: Slide the On/Off Switch in an upward direction
#
to the ON symbol ( ). The pager emits an interrupted beep
and the lamp flashes for 4 seconds.
A full-segment display accompanies the power-up alert.
888888888888
The display then changes to the standby screen.
8:59a
Standby Screen in SILENT Mode
D 8:59a
Standby Screen in ON Mode
INTRODUCTION
Congratulations on your purchase of a Motorola BRAVO
PLUS numeric display pager. This compact pager has
been designed with simple-to-use operating buttons, rug-
ged housing, and an easy-to-read display.
The BRAVO PLUS pager fits easily in your pocket or
purse, or can be worn on your belt.
The BRAVO PLUS pager offers a number of features. We
encourage you to read this instruction manual carefully to
obtain the full benefits from your BRAVO PLUS pager.
CONTROLS
Read Button (
vate pager functions. Also used to scroll through the hours
and minutes for time setting.
Menu Button (
menus and set the time of day.
2
SETTING THE TIME
• To set the time, press
• The hours digits (represented by the grey characters in
• The first digit of the minutes (represented by the grey
• All portions of the time of day screen, except the colon
3 4
Alert
Menu (
R
Read ( )
Lamp
Button
Button
BRAVO PLUS
R
) – Used to read messages and to acti-
F
) – Used to scroll through the pager
F
seTr Trime
until
R
then press .
the sample shown below) begin to blink.
12:00a
R
Set the hours digits by pressing
is displayed along with the appropriate
R
(for P .M.) symbol. Keep pressing
hours from A.M. to P.M. When the correct hour (A.M. or
F
P.M) is displayed, press to adv ance to the minutes
digits.
R
character) begins to blink. Press
F
digit of the minutes. Press to advance to the second
R
digit of the minutes. Press to change the second digit
F
of the minutes. Press one more time to leave the time
setting function.
8:00a
:
( ), stop blinking. The time of day is now set and the
pager is in the standby mode.
F
)
Switch
Side
View
On/Off
Switch
is displayed,
until the correct hour
a p
(for A.M.) or
to cycle through the
to change the first