Default Settings; Icon Flashes - AEG Voxtel D80 User Manual

IMPORTANT
Resetting the phone to its default settings will delete all entries in the Call
list. Current handset and base settings will also be reset. Entries stored in the
phonebook are retained.
1. Press , scroll
2. Scroll to « RESEt » and press
3. The display shows « RESEt ? ».
OK
4. Press to confirm or
restart automatically.

9.10 default settings

Key beep
Auto answer
Ringer melody
Ringer volume
Ear volume
Phonebook
10. hELP
No dial tone
. Use only the telephone line cord supplied.
. Check that the telephone line cord is connected properly.
. Check that the mains power is connected properly and switched on.
No display
. Check that the batteries are inserted correctly and fully charged. Use only approved
rechargeable batteries supplied.
. Check that the handset is switched on. Press and hold
. Reset the base by removing the batteries and disconnecting the mains power. Wait
for around 15 seconds before connecting it again. Allow up to one minute for the
handset and base to synchronize.

icon flashes

. Handset is out of range. Move closer to the base.
. Make sure that the handset is registered to the base.
. Check that the mains power is connected properly and switched on.
to « AdVAnCEd SEt » and press
OK
to return to the previous menu. The phone will
ON
OFF
1
3
2
Unchanged
OK
Calls list
Redial list
PIN code
Dial mode
Eco mode
Keypad lock
.
19
Empty
Empty
0000
Tone
OFF
OFF