[Color Temp.] Menu; [User Configuration] Menu - Sony BVM-X300 Operating Instructions Manual

Submenu Setting
[Copy From] Copies the other User Preset data to the
selected User Preset. The appropriate
settings are saved in [Default(D65)] for
D65 and [Default(D93)] for D93.
[User Preset1]

[User Preset2]

[User Preset3]

[User Preset4]

[User Preset5]

[Default(D65)]

[Default(D93)]

1) The offset value applied (x-0.006, y-0.011) is based on the Judd's
function to the CIE 1931 (x, y) value.
2) If you select each setting item while the MANUAL button is turned
on, the MANUAL button is turned off and the manually set value is
copied.

[Color Temp.] menu

You can select and adjust the color temperature.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konica Minolta Color Analyzer CA-
210/310
Submenu Setting
[Manual Adjustment] If you set the [Color Temp.] to the
[User1] to [User5] setting, you can
adjust the color temperature.
The set values are memorized.
[Adjust Gain/Bias]:

[Signal]:

[R/G/B Gain]: Adjusts the

color balance (gain) of R (red)/
G (green)/B (blue).
[R/G/B Bias]: Adjusts the

color balance (bias) of R
(red)/G (green)/B (blue).
[Internal]: Select to adjust the

white balance by using the
internal signal.
[External]: Select to adjust the

white balance by using the
signals input from an external
device.
Submenu Setting
[Copy From] Select from the following items to copy
the white balance data of the selected
color temperature.
[D65]

[D93]

[D61]

[D55]

[DCI]

[User1]

[User2]

[User3]

[User4]

[User5]

Note
If [Password Lock] has been turned
[On], the [User1] value is protected by a
password. To change the values, enter
the password.

[User Configuration] menu

Executes [System Setting], [Input Setting], [Function
Button Setting], [Audio Setting], [Internal Signal
Setting], and [Gamut Marker Setting].
[System Setting]
Submenu Setting
[LED Brightness] Selects the brightness of the indicator's
LED of the buttons, power switch, etc.
[High]: The LED becomes brighter.

[Low]: The LED becomes darker.

[Format Display] Selects the display mode of the signal
format.
[Auto]: The format is displayed for

[Off]: The display is hidden.

about five seconds when the
input of the signal starts.
Adjustment Using the Menus
21