Yamaha PSR-S670 Reference Manual page 15

2 VIBRATO
Vibrato is a quavering, vibrating sound effect that is produced by
regularly modulating the pitch of the Voice.
[3 ]
DEPTH
[4 ]
SPEED
[5 ]
DELAY
 EFFECT Page
1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/PANEL SUSTAIN
[1 ]/
REVERB
[2 ]
DEPTH
[3 ]/
CHORUS
[4 ]
DEPTH
[5 ]
DSP ON/OFF
[6 ]
DSP DEPTH
[7 ]
PANEL
SUSTAIN
2 DSP
[1 ]/
CATEGORY
[2 ]
[3 ]/
TYPE
[4 ]
[6 ]
VARI. ON/OFF
[5 ]/
DETAIL
[7 ]
[2 ]
PARAMETER
–[4 ]
[5 ]
VALUE
/[6 ]
 HARMONY/ARP Page
Same as the display called up via [FUNCTION]  TAB [E] MENU 1  Cursor buttons [][][E][F]
HARMONY/ARPEGGIO  [ENTER], with the exception of the following points:
• The parameters set via the [7 ] (DETAIL) buttons are shown on the top of the display.
• The [8 ] (COMPARE) and [8 ] (SAVE) buttons are available (see steps 4–5 on
Determines the intensity of the Vibrato effect. Higher settings result in a
more pronounced Vibrato.
Determines the speed of the Vibrato effect.
Determines the amount of time that elapses between the playing of a key
and the start of the Vibrato effect. Higher settings increase the delay of the
Vibrato onset.
Adjusts the reverb depth.
Adjusts the chorus depth.
Determines whether the DSP effect is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on
the panel.
Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the "2 DSP" menu
explained below.
Determines the sustain level applied to the edited Voice when the sustain
effect is on. The sustain effect is turned on/off from the display below.
[FUNCTION]  TAB [E] MENU 1  Cursor buttons [][][E][F]
VOICE SETTING  [ENTER]  TAB [E] VOICE CONTROL
Selects the DSP effect category and type. Select a type after selecting a
category.
Turns the DSP Variation on or off for the selected Voice. This setting
can also be made from the VOICE EFFECT [DSP VARI.] button on the
panel.
Calls up a detailed setting display. Press the [5 ] button for editing
the standard parameter value, and the [7 ] button for editing the
Variation parameter value.
Selects the DSP variation parameter to be set.
Adjusts the value of the DSP variation parameter.
Pitch
SPEED
DEPTH
DELAY
Time
page 12).
PSR-S670 Reference Manual
1
15