Troubleshooting - Motorola DCT700 User Manual

TROUBLESHOOTING

Before calling your service provider, review the troubleshooting guide. This information is to help you quickly solve a
problem. If your problem still exists, contact your service provider.
Problem
No sound
No picture
Picture or sound is noisy on one channel
Sound from only one stereo speaker
Possible Solution
Press MUTE on the remote control to restore the volume level.
Check that the stereo is set to the proper input source.
Turn on your VCR.
Make sure the TV or stereo volume is set to an appropriate level.
Check to be sure that all cables are connected properly (hand-tighten if
necessary).
If connected through the baseband RCA video connection, make sure the cables
are connected properly.
If you are watching TV using your VCR, be sure your VCR is powered and
running.
Reconnect the cable and hand-tighten if loose.
Hand-tighten or reconnect the cables properly. Be sure wires are not frayed and
plugs are not bent or broken.
20