Table of Contents
Advertisement
A P P E N D I X C
s i m p l e f i indicates it is reset by displaying:
Looking for PC...
simplefi is in
discovery mode.
Press the
add device
discover s i m p l e f i again. For help on discovery, see Section 3,
Installation.
Discovery is still not detecting simplefi
Before performing device discovery, exit other Windows
applications first. Some applications, such as HyperTerminal, can
periodically prevent device discovery from occurring successfully.
Also, review the next troubleshooting tip.
PC can't discover simplefi. AutoIP assigned IP addresses to
two network adapters on my PC.
If AutoIP assigns IP addresses to two, or more, network adapters
on your PC, your PC network is improperly configured. Access
to both networks will not be reliable. In addition, your PC will
not be able to discover s i m p l e f i.
To check for this problem, open an MS-DOS Prompt window
from the Windows
Start
"ipconfig"
and press the
or more network adapters begins with 169.254, AutoIP is assign-
ing IP addresses to these adapters, and you'll need to
reconfigure them.
To fix this problem, assign a static IP address to the wireless
adapter. For help, see Appendix D, Configuring IP Address
Information.
APPENDIX C, TROUBLESHOOTING
T R O U B L E S H O OTING
button on SimpleServe Console to
menu, select MS-DOS Prompt. Enter
Return
key. If the IP addresses of two
65
Advertisement
Table of Contents
