Portion Size; Changing The Portion Size During Drink Preparation - Miele CM 6110 Operating Instructions Manual

The flavour of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can programme the amount of
water to suit the size of your cups and
the type of coffee you are using.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed with these drinks.
Additionally, you can set the portion
sizes for hot milk and milk froth alone.
Each type of drink has a maximum
portion size that can be programmed
into the machine. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
machine.
The changed portion size is always
saved in the current User profile. The
name of the current User profile
appears in the top-left of the display.
There are two ways of initiating the
programming of the portion size:
– By touching the drink sensor when
you are preparing a coffee; or
– By selecting

Portion size

 menu.
Parameters
If the water container becomes empty
during the preparation of a drink, the
programming of the portion size will
be cancelled. The portion size will not
be saved.
Useful tip: To cancel portion size
programming, touch the drinks sensor
which is lit up or  for drinks from
Further programmes
Changing the portion size
during drink preparation
Portion sizes for Espresso  and
Coffee 
 Place a cup under the central spout.
 Touch  or  until
The drink will be dispensed from the
central spout into the cup.
 When the cup is filled up to the level
From now on the programmed portion
size will be dispensed for this drink.
in the
the display.
You can set the portion size as soon
as appears in the display.
Save
you want, touch OK.
Portion size
.
appears in
Change
37