Panasonic KX-TA616 Installation Manual page 203

5.1 Default Values
Address Program
[117] Call Pickup Tone
[118] Pulse Restriction
[119] Redialing after Pulse to Tone Conversion
[120] Bell Frequency
[121] Automatic Outside (CO) Line Access
Number Selection
[122] Automatic Rotation for Outside (CO) Line
Access
[123] Break Ratio
[124] SLT Ringing Mode Selection
[125] Toll Restriction Check for
[200] Hold Recall Time
[201] Transfer Recall Time
[202] Call Forwarding Start Time
[203] Pickup Dial Delay Time
[204] Call Duration Count Start Time
[205] Outside-to-Outside (CO-to-CO) Line
Duration Time Limit
[206] Dialing Start Time
[207] Hookswitch Flash Timing Range Selection
[208] Interdigit Time
[210] DTMF Time
[211] No Dial Disconnection
[212] Outside (CO) Line Duration Time Limit
[213] Bell Off Detection
[300] Carrier Code Assignment
[301] Toll Restriction — System Speed Dialing
Boundary Class
[302]–[305] Toll Restriction — Classes 2 through
5 Denied Codes
[306] Toll Restriction — Exception Codes
[309] Emergency Dial Number Set
[310] Account Codes
Enable
Enable
Disable
25 Hz
9
Disable
MODE 2
MODE 1
and # Enable
30 seconds
30 seconds
15 seconds delay
3 seconds
10 seconds after dial
10 minutes
0 millisecond
MODE 4
10 seconds
MODE 1
Disable
10 minutes
6 seconds
All codes – Not stored
Boundary Class-1
All codes – Not stored
All codes – Not stored
All codes – Not stored
All codes – Not stored
Default
Appendix
5-3