INSTALLATION INSTRUCTIONS ELECTRIC DRYER for models: 3RLEC8600 3RLEQ8033 Write down the model and serial numbers before installing dryer. Both numbers are listed on the model/serial rating plate located in the dryer door well. Model # _______________________________ Serial # _______________________________ Date of Purchase _______________________...
INSTALLATION REQUIREMENTS Tools and Parts Location Requirements Gather the required tools and parts before starting installation. WARNING Read and follow the instructions provided with any tools listed here. Tools needed ■ level ■ 20 to 30 cm (8" or l0") adjustable wrench that opens to 2.5 cm (1") ■...
Electrical Requirements Product Dimensions This dryer is supplied without an electric cord and plug. It must be connected by a competent electrician to a single-phase Dimensions shown with feet extended 2.5 cm (1") from bottom of dryer. electricity supply at the voltage shown on the dataplate, using a terminal block cover suitable fixed wiring installation in accordance with local and 27.9 cm...
Venting Requirements Plan Vent System WARNING Route the Vent The exhaust outlet is located at the center of the rear of the dryer. The exhaust vent can be routed up, down, left, right or straight out the back of the dryer. Fire Hazard Use a heavy metal vent.
The angled hood style (shown following) is acceptable. Vent Length Chart 10.2 cm Number of Type of vent Box or Angled (4") 90º turns louvered hoods or elbows hoods Rigid metal 15.8 m (52 ft.) 13.4 m (44 ft.) Flexible metal 9.4 m (31 ft.) 7.0 m (23 ft.) 6.4 cm...
Electrical Connection Connect Vent 1. Connect vent to dryer outlet using 10 cm (4") clamp. If WARNING connecting to existing vent, make sure the vent is clean. The vent must fit over the dryer outlet and inside the exhaust hood. 2.