At The End Of The Wash Cycle; Filtering System; Forget To Add A Dish? - Kenwood KDW243A Instruction Manual

When the washing cycle has finished,the buzzer of dishwasher will sound for eight seconds,then stop.Turn off the appliance using
the ON/OFF button,open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the
dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.
A forgotten dish can be added any time before the detergent cup opens.
1
Open the door a little to stop the washing.
2
After the spray arms stop working,you can open the door
completely.
Take care when op ening the door as the water maybe hot and can cause scalding.
The filter prevent larger remnants of food or other objects from getting inside the pump. This residue can
occasionally clog up the filters.
2
1
3
- Inspect the filters for obstructions every time the dishwasher has been used.
- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the
filters under running water.
1
2
3
3
4
The filter system consists of a coarse filter,a flat (Main filter)
And a microfilter(Fine filter).
1
Main filter
Food and soil particles trapped by this filter are pulverized by a
special jet on the lower spray arm and washed down the
drain.
2
Coarse filter
Larger items, such as pieces of bone or glass, that could clog
the drain are trapped in the coarse filter. To remove an item
caught in this filter, gently squeeze the taps on the top of this
filter and lift it out.
3
Fine filter
This filter holds soil and food residue in the sump area and
prevents it from being redeposit on the dishes during a cycle.
step１：Unscrew the C
and then gently lift it up
step２：Gently lift the Main filter up
step 3： Gently lift the Fine filter up
8
Add dishes.
Close the door and make sure it's properly shut.
oarse filter ,