Product Setup; Zero Configuration Setup - D-Link DWR-922 Quick Installation Manual

PRODuCT SETuP

ZERo CoNFIGuRATIoN SETuP

Ensure that your DWR-922 4G LTE Router is powered off before performing the steps below.
Router
SIM card
Modem
Router
PC
Modem
Router
PC
Modem
Phone
Handset
Router
DWR-922
Step 1:
Insert a standard USIM card into the SIM card slot on the back of the
router with the gold contacts facing downward.
Step 2:
Insert your Ethernet cable into the WAN port on the back of the
router.
Note: The 4G connection can also be used as a backup WAN. Once
a backup is configured, the router will automatically use 4G for the
Internet connection if the Ethernet WAN is not available.
Step 3:
Insert the Ethernet cable into a LAN port on the back panel of the
DWR-922 4G LTE Router, and an available Ethernet port on the
network adapter in the computer you will use to configure the unit.
Step 4:
(Optional) Connect a phone handset to the phone port (RJ11) on the
back panel of the DWR-922.
Log in to the configuration page to set up your handset for Voice over
IP (VoIP) calls (see below for information about how to configure the
DWR-922).
Note: Do not directly connect the DWR-922 to a telecommunication
network or a building's telephone socket.
3