Copying A Kit; Factory Reset - Asus samplepad pro User Manual

MIDI
• Receive Channel: Sets the MIDI channel that SamplePad Pro
will receive MIDI data. The available parameters are All, or
individual MIDI channels 1-16.
• Send Channel: Sets the MIDI channel that SamplePad Pro will
send MIDI data. The available parameters are individual
channels 1-16.
• Receive Program Changes: Sets whether SamplePad Pro will
react to program change messages received on the MIDI
Receive Channel. The available parameters are Yes and No.
• Send Program Changes: Sets whether SamplePad Pro will send program changes over the MIDI Send
Channel when a kit is changed. The available parameters are Yes and No.
•
Ext. Clock: Sets whether the SamplePad Pro will send or receive MIDI Clock. This feature can also be set to
OFF.
Load Samples/Kits Via USB
•
After this feature is selected, SamplePad Pro will connect to your
Mac or PC via the USB connection for easy SD card
management. To exit this mode, hold Cursor Left and Cursor Up
on SamplePad Pro for two seconds.
Other
• Pad Curve: Selects the velocity curve sensitivity setting (1-8) to
be used across all of the internal pads. You can audition the Pad
Curve by striking a pad while changing this setting.
• Auto-Shutdown Time: Selects how long SamplePad Pro will
remain powered on if there is no activity. Select from 30 minutes,
60 minutes, or Off (SamplePad Pro will remain powered on until
you manually power it off).
Saving a Kit
1. Select the kit on the main screen that you have edited and would
like to save.
2. Press and hold the Cursor Down and Cursor Right buttons for 2
seconds simultaneously to enter the Save menu.
3. Move the cursor to the SAVE KIT option by pressing the Cursor
Up or Cursor Down buttons.
4. Press Cursor Right to enter the SAVE KIT submenu.
5. Press Cursor Up or Cursor Down to highlight "Yes" and then
press Cursor Right to save the kit.
6. To exit the SAVE KIT submenu, press the Cursor Down until Exit is highlighted, and then press the Cursor
Right button. Alternatively, press and hold the Cursor Down and Cursor Right buttons to exit this menu.

Copying a Kit

1. Press and hold the Cursor Down and Cursor Right buttons for
2 seconds to enter the Save menu.
2. Move the cursor to the COPY KIT option by pressing the Cursor
Up or Cursor Down buttons.
3. Press Cursor Right to enter the COPY KIT submenu.
4. Press Cursor Left or Cursor Right to select the kit that you
would like to copy.
5. Press Cursor Down and then press Cursor Left or Cursor
Right to select the location that you would like to copy the kit to.
6. Press Cursor Down to highlight Confirm and then Cursor Right to copy the kit.
7. To exit the COPY KIT submenu, press the Cursor Down until Exit is highlighted, and then press the Cursor
Right button. Alternatively, press and hold the Cursor Down and Cursor Right buttons to exit this menu.

Factory Reset

To reset the internal kits and global settings to the factory default settings, hold the Cursor Left and Cursor Right
buttons while powering on the SamplePad Pro. This will not affect samples or kits stored on your SD card.
9