Safety Features; Safety Lock / System Lock - Miele KM 6322 Operating And Installation Instructions

Safety lock / System lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.
Three-finger control is the default
setting. You can change the default to
one-finger control (see
"Programming").
Your cooktop is equipped with a system
lock and a safety lock to prevent the
cooktop and the cooking zones being
switched on or any settings being
altered.
The system lock is activated when the
cooktop is switched off. When it is
activated, the cooktop cannot be
switched on and the timer cannot be
used. The cooktop is programmed so
that the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the cooktop has been switched off if
the system lock is not manually
activated first (see "Programming").
The safety lock is set when the
cooktop is switched on. When the
safety lock is activated:
– The power settings for the cooking
zones and the timer settings cannot
be changed.
– The cooking zones, entire cooktop
and the timer can be switched off,
but once switched off cannot be
switched on again.
If a locked sensor is touched when the
safety lock or the system lock is
activated, the indicator light comes on
and  appears in the timer display for a
few seconds.
Activating
 Touch the  sensor and the sensor
controls for both right cooking zones
until  appears in the timer display
and the indicator light for the safety
lock lights up.
The indicator light and  go out after
a short while.
Deactivating
 Touch the  sensor and the sensor
controls for both right cooking zones
until  appears in the timer display
and the indicator light for the safety
lock goes out.

Safety features

39