Advertisement
4.
Once the location has been identified, mount the reader using the provided double-sided adhesive strip.
5.
Secure the cable with the supplied adhesive cable guides.
6.
Power on the device.
NOTE:
The card reader will not be "Active" or "Ready to use" with HP Access Control until an Agent file has
been installed on the printer.
NOTE:
See the
installation instructions for use with HP Access Control.
NOTE:
See
on how to configure the HP JetAdvantage Private Print software and activate the HP Multi-Protocol Proximity
Card Reader to work with HP JetAdvantage On Demand solutions.
6
HP Multi-Protocol Proximity Card Reader CZ208A Installation Instructions
HP Access Control (HP AC) Secure Pull Print for HP Devices Administrator Guide
Configure and Activate the HP Multi-Protocol USB Proximity Card Reader CZ208A
for additional
for information
Advertisement
