Copying From Dvd To Vcr; Recording From Another Video Recorder - NEC NDT-42 Owner's Manual

Additional Operation - VCR part

Copying from DVD To VCR

This unit allows you to copy the contents of a DVD to a
VHS tape with a press of the REC/QSR button.
Notes:
Be sure to set "Progressive Scan" to "Off" on the
setup menu.
If the DVD you are attempting to copy is copy
protected, you may not be able to copy the disc.
1. Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2. Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3. Copy the DVD to VHS Tape
Press the REC/QSR button.
The DVD will go into Play mode and the VCR will
go into Record mode.
If the DVD disc menu appears, you may need to
press the Play button manually to begin copying.
Note:
If you press the REC/QSR button, be sure this unit in
DVD mode.
4. Stop the Copy Process
When the DVD is finished playing, press STOP to
end the copy.
You must stop the Copy process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
26
Recording from another video
recorder
With this video recorder you can make recordings from
an external source, such as copying from
another video recorder or a camcorder.
Note:
In the following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to as VCR A.
1. VCR A should be connected to the AUDIO L/R (VCR
IN AV1)/VIDEO (VCR IN AV1) on the rear panel of
your unit or AUDIO IN (L(MONO)/R) / VIDEO IN on
the front panel of your unit.
2. Insert the recorded tape into VCR A and a blank
tape into VCR B.
3. Press AV until the socket you wish to record from is
displayed. (VCR B)
AV 1 for recording from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) terminals on the rear of your
unit.
AV 2 for recording from AUDIO IN (L(MONO)/R)/
VIDEO IN terminals on the front of your unit.
4. To start recording, press the REC/QSR on VCR B
and PLAY on VCR A.
5. When you want to finish copying, press the STOP
on both video recorders.