Removing And Reinstalling The Main Parts; Cd Mechanism Section - Sharp CD-PC1881V Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION

Perform steps 1, 2, 3 and 14-16 of the disassembly method to
remove the CD mechanism.
How to remove the T/T up/down loading motor
(See Fig. 11-1)
1. Remove the screws (A1) x 2 pcs., to remove the T/T up/
down loading motor.
How to remove the pickup (See Fig. 11-2)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)x
1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4)x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector to protect the optical pickup from
electrostatic damage.
T/T Up/Down
Loading Motor
Motor
PWB
(B1) x2
ø2.6 x6mm
Shaft
(B2) x1
– 11 –
CD-PC1881V
(A1) x2
ø2.6 x5mm
Figure 11-1
Stop Washer
(B3) x1
CD Mechanism
Gear
(B4) x1
Figure 11-2
Pickup