Related Manuals for Kenwood KIL60W14
Summary of Contents for Kenwood KIL60W14
- Page 1 BUILT-IN 60CM WHITE UNDERCOUNTER LARDER KIL60W14 installation / instructions manual...
-
Page 3: Table Of Contents
Contents safety warnings ........................4 unpacking ..........................6 installation ........................... 7 location ..........................7 levelling the unit ....................... 7 free space requirements ....................7 reversing the door swing ....................8 height regulation ......................10 installation of the unit under the worktop ............... 10 fastening the unit under the worktop ................11 mounting the kitchen cabinet door .................11 cleaning before use ....................... -
Page 4: Safety Warnings
safety warnings For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. • Read all instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual. - Page 5 • Children should be supervised to ensure that they do not play with the unit. • If your unit is fitted with a lock to prevent children being trapped inside, keep the key out of reach and not in the vicinity of the unit. • Do not store volatile or flammable substances, such as aerosol cans with a flammable propellant, in the unit.
-
Page 6: Unpacking
Thank you for purchasing your new Kenwood Larder. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this installation/instruction manual in order that you fully understand all the operational features it offers. -
Page 7: Installation
installation installation location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16°C and 38°C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption. -
Page 8: Reversing The Door Swing
installation reversing the door swing tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner • Ensure the unit is unplugged and empty. • To take the door off it is necessary to tilt the unit backwards. you should rest the unit on something solid, e.g. - Page 9 installation 4. Remove the door while supporting the bottom of the door. Be careful with the hinges. 5. With the hinges open, undo the screws holding them to the cabinet. Be careful with the hinges, use a long shafted screwdriver if you have one.
-
Page 10: Height Regulation
installation 8. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the levelling feet as needed. height regulation min 580 825 - 870 825 = 100 - 170 870 = 180 - 250... -
Page 11: Fastening The Unit Under The Worktop
installation fastening the unit under the worktop screw the unit to the worktop using the screws provided (3 x sT4.2 screws). Remember to drill the holes. mounting the kitchen cabinet door 1. Fit both the double threaded bolts to the top of the fridge door. Leave a gap of 2mm between the double threaded bolt and the top of the fridge door. - Page 12 installation 3. Fit the upper connecting blocks after drilling holes. screw Upper Connecting Block Aesthetic Door 4. Fit the lower connecting blocks to the bottom of the fridge door. Fridge Door Lower Connecting Block Bolt 5. Hang the aesthetic door onto the fridge door.
-
Page 13: Cleaning Before Use
installation 7. Once alignment is achieved , fit the domed headed nuts. Domed Headed Nuts Aesthetic Door Fridge Door 8. Open the fridge door and screw the Aesthetic Fridge Door bottom of the aesthetic door to the lower Door connecting block. Remember to drill the holes Ø2.8 mm to a depth of 10 mm. -
Page 14: Product Overview
product overview main unit Upper Fridge Door Balcony Temperature Regulator Cover Upper Fridge Door Balcony Adjustable Glass shelf Lower Fridge Door Balcony salad Bin Cover salad Bin Bottom Wire Rack Egg Tray... -
Page 15: Operation
operation switching on your unit 1. Connect the mains cable to the mains socket. The internal temperature of your unit is controlled by a thermostat. Position 7 is the coldest and position 0 turns the unit off. 2. Adjust the thermostat control dial to the desired position, bear in mind that the higher the number, the lower the temperature. -
Page 16: Cleaning
cleaning defrosting Frost may accumulate on the inner rear surface of the appliance which will automatically defrost during the off cycle of the compressor. Water is channelled via the drain hole to the collection tray above the compressor where it will evaporate. Please ensure the drain hole is checked and cleaned on a regular basis so water can exit the storage compartment. -
Page 17: Care When Handling / Moving Your Unit
care when handling / moving your unit Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface. servicing The unit should be serviced by an authorised engineer and only genuine spare parts should be used. -
Page 18: Specification
Model KIL60W14 Fresh Food Storage Volume 133L Storage Temperature 0°C - 8°C, average ≤ 4°C Energy Consumption 0.321kwh/h Energy consumption 117 kwh per year, based on standard test results for 24 hours. Actual energy consumption will depend on how the appliance is used and where it is located. - Page 20 DsG Retail Limited is responsible for after sales service. If you have a query about the product please contact our product support line 0844 561 6263 (Currys). DsG Retail Ltd. (co. no. 504877) Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK IB-KIL60W14-140507v1...