Setting The Address (Id) Of The Camera; Setting The Protocol Of The Camera - Bosch VEZ-400 Series Operation Manual

AUTODOME 4000 Mini PTZ Dome
Figure 9.2: Dome Camera Switches
Number
1
2
3
Figure 9.3: Close-up of Rotary Switches and Dip Switches
9.6.1

Setting the address (ID) of the camera

To prevent faulty operations and malfunctions, each camera must have an unique address
(ID). The default setting is 0[ID001].
X0
SW301
Table 9.6: Dome Camera ID Setting (Rotary Switches SW301, SW302)
9.6.2

Setting the protocol of the camera

Set the protocol setting, the baud rate, and the termination setting of dip switch SW303,
using the data in the tables below.
Note: The value marked * is the default setting.
Bosch Security Systems, Inc.
Description
SW301 Rotary switch
SW303 Dip switches
SW302 Rotary switch
X1
SW302
Operation Manual
Connection | en 41
2015.08 | |