Eq (Part Equalizer) - Yamaha Montage 7 Reference Manual

Reference
Performance
Side Chain/Modulator (Side Chain/Modulator Part)
The Side Chain/Modulator uses the output from one track to control an effect in a different track. You can
specify the Effect type for activating the feature so that input signals for Parts other than the selected Part
or the audio input signal can control the specified Effect. This may not be active depending on the
particular Effect Type.
Here you can determine the Part used for the Side Chain/Modulator.
This is not available when you select the same Part or "Master" as the Modulator Part.
Settings: Part 1 – 16, A/D, Master, Off
Effect Parameter
Active Effect parameters differ depending on the selected Effect Types. For details on the editable Effect
parameters, see the Data List PDF document. Also, for details on the description for each Effect parameter,
see the Synthesizer Parameter Manual PDF document.

EQ (Part Equalizer)

From the Part Equalizer display you can set parameters related to Part EQ.
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect] 
Operation
[EQ]
3-band EQ / 2-band EQ (3-band EQ/2-band EQ Switch)
Switches displays between 3-band EQ and 2-band EQ.
Settings: 3-band EQ, 2-band EQ
MONTAGE Reference Manual
Edit
Normal Part (AWM2)
Part
3-band EQ Insertion Effect
Part EQ
Search
Drum Part Normal Part (FM-X)
2-band EQ
Part EQ
Utility Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
70