Operating An Ipod Directly - Passenger Control; Bluetooth (Handsfree Calling And Music Streaming); Before Using The Bluetooth Function; Bluetooth Operations - Sony MEX-BT5700U Operating Instructions Manual

Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE).
"Mode iPod" appears and you will be able to
operate the iPod directly.
To exit the passenger control
Press and hold (MODE).
Then "Mode Audio" will appear and the play
mode will change to "Resuming Mode."
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
turned off.
Bluetooth (Handsfree calling
and Music streaming)
Before using the Bluetooth
function

Bluetooth operations

To use the Bluetooth function, the following
procedure is necessary.
1 Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called "pairing." This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time. You
can pair up to 9 devices. (Depending on the
device, you may need to input a passcode for
each connection.)
2 Connection
To use the device after pairing is made, start
the connection. Sometimes pairing allows to
connect automatically.
3 Handsfree calling/Music streaming
You can talk handsfree and listen to music
when the connection is made.
For details of usable devices, visit the following
support site.
Support site
http://esupport.sony.com
http://www.xplodsony.com/

Configuring Bluetooth Settings

Before connecting to a Bluetooth device,
configure the Bluetooth Settings on this unit.
1 Press (BT).
The Bluetooth settings menu appears.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
Depending on the setting, by rotating the
control dial again, other items can be set.
continue to next page t
21