Philips BTB2315 User Manual page 14

M I C RO M U S I C S YS T E M B T B 2 3 1 5
INFO
RDS SCAN
Philips BTB2315
1
Press SOURCE repeatedly to select the
Bluetooth source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BTB2315' on your
Bluetooth enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
4
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•
The unit can memorize up to 4 previously connected
Bluetooth devices.
EN
12
PIN
0000
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range; or
• Press and hold
» The current Bluetooth connection is
disconnected.
To clear Bluetooth pairing history:
• Press and hold
» The current Bluetooth is cleared.
for 3 seconds.
for 8 seconds.