Audio Transfer - Motorola PMLN6716 User Manual

Figure 2.10: Pairing your WRSM
When a WRSM has been paired with a radio, its behavior upon the next
power up is dependent on the Bluetooth configurations of the Radio.
Refer to "APX Radio's Bluetooth Configuration Options" on page 10 or
radio user manual for more details on the programming options for
Bluetooth accessories.
If the WRSM has been paired with a radio and needs to now be paired
with a different radio, the WRSM does not have to clear its previous
pairing. The previous pairing will be cleared automatically when pair
with a new radio.
10
English
Align

Bluetooth Configuration Options of the APX Radio
Re-Pair Timer
There are two options for configuring the Bluetooth pairing type. The
type defines the duration the radio and the accessory retain the pairing
information.
•
Immediate – When the radio and/or device is turned off after pairing,
they are unable to re-connect when they are turned back on. The
user must re-pair the devices to re-establish a new connection.
•
Infinite – When the radio and/or device are turned off after pairing,
they can resume the Bluetooth connection without user intervention
when they are turned back on.

Audio Transfer

When connected to the Mobile Microphone Gateway, you can transfer
the audio to the mobile radio without dropping the connection. Refer to
"Transfer Audio Or Replacing With New Wireless Device" on page 20.
Whenever audio is routed to the mobile radio, the WRSM plays "Audio
OFF" and muted. Audio can be transferred back to the WRSM by
pressing the PTT button or volume up to unmute.
If audio is transferred back via pairing action (aligning blue dots), the
WRSM will play "Audio ON". If the WRSM PTT is pressed when the
Mobile Microphone Gateway is transmitting, the WRSM plays a bad
bonk tone.
NOTE:
Only the Mobile Microphone Gateway supports the Audio
Transfer feature, other APX portable radios do not support
the Audio Transfer feature.