D-Link DVG-5004S Quick Installation Manual page 5

Connecting the DVG-5004S directly to
a Modem and Computer (continued)
e. Attach one end of the Ethernet Cable provided in this package to the
LAN or Ethernet Port on the Cable/DSL Modem.
f. Attach the other end of the provided
Ethernet Cable to the WAN Port of the
DVG-5004S.
g. Attach one end of the provided phone cable to a standard analog
telephone.
h. Attach the other end of the phone cable to
the phone port on the rear panel of the
DVG-5004S.
i. Reconnect the power to the Cable/DSL Modem (Plug in or turn on
the power switch).
j. Connect the Power Adapter to the Power
Connecter on the DVG-5004S.
k. Connect the other end of the Power
Adapter to an available electrical outlet
(Wall Socket or Surge Protector).
l. Restart your PC.
If your ISP registers your computer's MAC address, see the section labeled MAC
Cloning for Connections in the user manual on the CD-ROM.
PPPoE Users, please continue to the next page for additional configuration steps.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
5