Setting The Brightness; Sound Sensitivity Settings; Temperature Settings; Troubleshooting - Lenovo ayden User Manual

OPERATION

Setting the Brightness

Brightness Mode sets the brightness of the
the screen. A dimmer screen will extend the
battery life.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different Brightness Settings.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.

Sound Sensitivity Settings

Sensitivity Mode allows you to adjust the sensitivity of the sound the camera picks up.
The LED Ring on the front of the monitor also indicates how loud the sound in the room
is with colors.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different Sound Sensitivity Settings.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
whisper, murmer Yelling
Disconnected
Chatter
16
OPERATION

Temperature Settings

Studies indicate your baby's room should be between 68-71° F (20- 21° C). This camera
includes a temperature monitor for your baby's room. The temperature of the nursery
can be shown with your video monitor's on-screen display in your choice of Fahrenheit
or Celsius so you will always know that your baby is comfortable.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different Temperature Settings.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.

TROUBLESHOOTING

ISSUE
• Confirm that the Camera and Monitor are ON
• The battery may be depleted; charge battery
Equipment does not function
• The power adapter(s) may not be
properly connected
• Camera and monitor may not be properly paired;
No reception
move the Camera and Monitor closer together
• The Camera and Monitor may be too far apart
• The battery power may be too low
• Other electronic devices may be interfering with
Reception Interference (static)
the signal
• The Camera and Monitor may be placed too close
to many metal objects
Noise (static, beeping) • Battery power may be too low
• The power adapter may not be connected
The rechargeable battery will
• Battery pack may not be properly connected inside
not charge
the battery compartment
POSSIBLE SOLUTION
17