Advertisement
SPECIFICATIONS
Power source
Power consumption
Motor voltage
Charging time
Shaves per charge
Measurement
Weight
Supplied accessory
CONTENTS
Wet/Dry Rechargeable Shaver
ES8075-U1
ES8077-U1
ES8078-U1
AC 100-240V, 50-60Hz (Automatic voltage conversion)
Approx. 5W
3.6V DC
1 Hour
14 times (3 minutes shave)
(H)15.3 x (W)6.2 x (D)4.6 cm
180g (without protective cap)
Self-cleaning recharger
Page
2
3
5
© 2005 Matsushita Electric Works, Ltd. All rights
reserved. Unauthorized copying and distribution is a
violation of law.
ORDER NO. SD0509U48C1
E6
Page
7
10
11
Advertisement
Related Manuals for Panasonic ES8075-U1
Summary of Contents for Panasonic ES8075-U1
-
Page 1: Table Of Contents
ORDER NO. SD0509U48C1 Wet/Dry Rechargeable Shaver ES8075-U1 ES8077-U1 ES8078-U1 SPECIFICATIONS Power source AC 100-240V, 50-60Hz (Automatic voltage conversion) Power consumption Approx. 5W Motor voltage 3.6V DC Charging time 1 Hour Shaves per charge 14 times (3 minutes shave) Measurement (H)15.3 x (W)6.2 x (D)4.6 cm... -
Page 2: Schematic Diagram
ES8075-U1 / ES8077-U1 / ES8078-U1 1 SCHEMATIC DIAGRAM 1.1. ES8075 1.2. ES8077/ES8078... -
Page 3: Disassembly Instructions
ES8075-U1 / ES8077-U1 / ES8078-U1 2 DISASSEMBLY INSTRUCTIONS Follow the procedure below to disassemble the main unit. 1. Remove the cap, the outer foil with foil frame and the 4. Remove the both side of housing clips. inner blade. Loosen four screws and remove housing B. - Page 4 ES8075-U1 / ES8077-U1 / ES8078-U1 6. Remove trimmer and trimmer handle. 9. Take out the battery from the chassis. 10. Unsolder the lead wires from the module. 7. Move gently the linear motor assembly down and unhook it and remove the float springs from housing A.
-
Page 5: Assembly Instructions
ES8075-U1 / ES8077-U1 / ES8078-U1 3 ASSEMBLY INSTRUCTIONS NOTE: When reassembling, replace the new waterproof rubber. Make sure whether there is NO foreign substance sticking around a part covered with waterproof seal. 1. Solder the lead wires with the module. - Page 6 ES8075-U1 / ES8077-U1 / ES8078-U1 7. Tighten the four screws and set the housing clip. 9. Set the bottom cover tighten with a screw. 8. Attach the rear panel with the position "LOCK". 10. Set the trimmer driving bar and the slit blade driving bar.
-
Page 7: Troubleshooting Guide
ES8075-U1 / ES8077-U1 / ES8078-U1 4 TROUBLESHOOTING GUIDE 4.1. Main unit and charging adaptor... - Page 8 ES8075-U1 / ES8077-U1 / ES8078-U1...
- Page 9 ES8075-U1 / ES8077-U1 / ES8078-U1 4.2. Self-cleaning recharger...
-
Page 10: Operation Of Self-Cleaning Recharger
ES8075-U1 / ES8077-U1 / ES8078-U1 5 OPERATION OF SELF-CLEANING RECHARGER... -
Page 11: Exploded View & Replacement Parts List
ES8075-U1 / ES8077-U1 / ES8078-U1 6 EXPLODED VIEW & REPLACEMENT PARTS LIST 6.1. ES8075 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description Remarks Per Unit WES8044X7158 PROTECTIVE CAP... - Page 12 ES8075-U1 / ES8077-U1 / ES8078-U1 6.2. ES8077 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description Remarks Per Unit WES8044X7158 PROTECTIVE CAP (BG) WES9085PC OUTER FOIL WES9064PC INNER BLADE...
- Page 13 ES8075-U1 / ES8077-U1 / ES8078-U1 6.3. ES8078 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description Remarks Per Unit WES8044X7158 PROTECTIVE CAP (BG) WES9085PC OUTER FOIL WES9064PC INNER BLADE...