Yamaha DVD-S840 Service Manual
Hide thumbs Also See for DVD-S840:

Advertisement

Quick Links

本资料由OKXIA视听皮带资源库www.okxia.cn提供
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
CONTENTS
TO SERVICE PERSONNEL .......................................... 2
LOCALE MANAGEMENT INFORMATION ................... 4
FRONT PANEL .............................................................. 4
REAR PANELS .............................................................. 5
REMOTE CONTROL PANEL ........................................ 5
SPECIFICATIONS / 参考仕様 ........................................ 6
1 0 0 8 5 0
DVD-S840
IMPORTANT NOTICE
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

DVD PLAYER

SERVICE MANUAL
SELF-DIAGNOSIS FUNCTION AND SERVICE MODES
/ 自己診断機能とサービスモード .................................... 18~29
UNIT / メカニズムユニットの分解組立 ........................... 30~40
ADJUSTMENT / 調整 ............................................. 41~44
ABBREVIATIONS / 略語表 .................................... 45~47
BLOCK DIAGRAM ................................................. 48~53
PRINTED CIRCUIT BOARD .................................. 55~60
SCHEMATIC DIAGRAM ........................................ 61~73
VOLTAGE CHART / 電圧表 ......................................... 74
PARTS LIST ........................................................... 75~85
P.O.Box 1, Hamamatsu, Japan

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha DVD-S840

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    DVD-S840 TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3: Prevention Of Electro Static Discharge

    DVD-S840 Laser Diode Properties Type: Semiconductor laser GaAlAs Wave length: 658 nm (DVD) 790 nm (VCD/CD) Output Power: CLASS IIa 1mW (DVD) CLASS I 1mW (VCD/CD) VARO! : AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTTÖMÄLLE LASER- SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
  • Page 4: Locale Management Information

    DVD-S840 2. Handling of the Optical Pickup 1. To prevent damage to the optical pickup replacement parts during transportation and before installation, both ends of the laser diode are short-circuited. After installing the new part, remove the short circuit according to the correct procedure in this service manual.
  • Page 5: Rear Panels

    DVD-S840 REAR PANELS U model J model REMOTE CONTROL PANEL POWER OPEN/CLOSE STOP PAUSE PLAY SLOW/ SEARCH SKIP TOP MENU MENU ENTER ON SCREEN RETURN SET UP SUB TITLE AUDIO ANGLE RANDOM REPEAT PROG CANCEL GROUP PAGE VIDEO OFF POS. MEMO.
  • Page 6: Specifications / 参考仕様

    DVD-S840 SPECIFICATIONS / 参考仕様 Signal System / ビデオ信号方式: ......NTSC Pickup / ピックアップ: Operating Temperature Range / 動作温度範囲: ... +5 to +35°C Wave Length: ........658 nm/790 nm Operating Humidity Range / 動作湿度範囲: Laser power: ........CLASS 2/CLASS 1 .... 5 to 90% RH (no condensation / 結露無し) Power Supply / 電源電圧:...
  • Page 7: Disassembly Procedures And Service Position / 分解手順とサービスポジション

    DVD-S840 DISASSEMBLY PROCEDURES AND SERVICE POSITION / 分解手順とサービスポジション (番号順に部品を取り外してください。) (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. AC電源コンセントから、電源コードを抜いてください。 1. Disassembly Procedure 1. 分解手順 Top Cover トップカバー MODULE P.C.B. Rear Panel Tray モジュールP.C.B. リアパネル...
  • Page 8 DVD-S840 3. Top Cover 3. トップカバー Remove the screws. ねじを外す。 4. Tray 4. トレイ 1. Remove the gear for opening the tray from the 1. メカニズムユニットよりトレイ引き出しギアを外し、ド mechanism unit and install it onto a screwdriver to ライバーに挿入し、ギア治具を準備する。 make a gear jig.
  • Page 9 DVD-S840 5. Front Panel 5. フロントパネル 1. Remove the screws. 1. ねじを外す。 2. ツメを外す。 2. Release the tabs. 3. コネクターを外す。 3. Remove the connectors.
  • Page 10 DVD-S840 6. Mechanism Unit 6. メカニズムユニット 1. Remove the screws. 1. ねじを外す。 2. Remove the connectors. 2. コネクターを外す。 3. Pull out the mechanism unit vertically. 3. メカニズムユニットを垂直に引き抜く。 7. INTERMEDIATE P.C.B. 7. 中継P.C.B. 1. Remove the screws. 1. ねじを外す。 2. Remove the solders.
  • Page 11 DVD-S840 8. MODULE P.C.B. 8. モジュールP.C.B. 1. Remove the screws. 1. ねじを外す。 2. Remove the connectors. 2. コネクターを外す。 3. Squeeze each tab with pliers to pull out the MODULE 3. ツメをニッパで押え込みながら、モジュールP.C.B.を垂 P.C.B. vertically. 直に引き抜く。 9. FRONT 1 P.C.B. and FRONT 2 P.C.B.
  • Page 12 DVD-S840 10. Rear Panel 10. リアパネル 1. Remove the screws. 1. ねじを外す。 2. Release the tabs. 2. ツメを外す。 11. TERMINAL and POWER P.C.B. 11. ターミナルP.C.B.・パワーP.C.B. 1. Remove the connectors 1. コネクターを外す。 2. Remove the screws. 2. ねじを外す。 3. Remove the FC1001A Solder.
  • Page 13 DVD-S840 12. Service Position 12. サービスポジション 12.1. Service position of the MODULE P.C.B. 12.1. モジュールP.C.B.サービスポジション 12.2. Service position of the INTERMEDIATE P.C.B. 12.2. 中継P.C.B.サービスポジション 12.3. List of the Extension Cables 12.3. 延長ケーブル表 TX946370 26 pins PS4201 (MODULE P.C.B.) – PP4301 (TERMINAL P.C.B.)
  • Page 14: Optical Pickup Self-Diagnosis And Replacement Procedure / 光ピックアップの故障診断と交換手順

    DVD-S840 OPTICAL PICKUP SELF-DIAGNOSIS AND REPLACEMENT PROCEDURE 1. Self-diagnosis An optical pickup self-diagnosis function and tilt adjustment check function have been included in this unit. When repairing, use the following procedure for effective Self-diagnosis and tilt adjustment. Be sure to use the self-diagnosis function before replacing the optical pickup when "NO DISC"...
  • Page 15 DVD-S840 ■光ピックアップの故障診断と交換手順 1. 故障診断 本機には、 「光ピックアップ故障診断機能」 と 「あおり調整確認機能」 を内蔵しております。修理時は、次の手法を用い効率的に故障 診断、およびあおり調整を実施ください。 「NO DISC」 表示が出る場合は光ピックアップを交換する前に 「故障診断」 を行います。CD用レーザー駆動電流の現在値が 「55 を 越える」 場合 (DVDは70) が光ピックアップ交換の目安になります。 注意 電源を入れてから3 分以内に診断をしてください。 (プレーヤーが温まると正確な診断ができません。) NO DISC表示が出る スムーズに再生しない等 ◎光ピック故障診断機能を使う [確認方法]…ディスク無の状態で ・「 」と「 」 (DVD) または  「    」 (CD)を押しながら  リモコンより「     」を レーザー駆動電流の確認  送信する [表示内容] 現在値が...
  • Page 16 DVD-S840 2. Cautions to Be Used Before Replacing the Optical Pickup Unit and Spindle Motor Assembly Before replacing the optical pickup unit and spindle motor assembly, check the total usage hours for each of them. The checking method is as follows: Note: Each of these procedures should start with the unit stopped.
  • Page 17 DVD-S840 2. 光ピックアップユニット、スピンドルモータアセンブリ交換時の注意 光ピックアップユニット、スピンドルモータアセンブリを交換する場合は、交換前にそれぞれの使用累積時間を確認してく ださい。 確認方法は下記のように操作して行います。 動作条件とキー操作 表   示 レーザ使用時間 ストップ状態で、本体 t1_xxxx_yyyy を押す xxxx:DVDレーザ使用時間 yyyy:CDレーザ使用時間 時間を単位10時間の4桁で表示する。 SPモータ使用時間 ストップ状態で、本体 t2_xxxx を押す xxxx=時間を単位10時間の4桁で表示する。 CDレーザとDVDレーザ使用時間の ストップ状態で、本体 t1_0000_0000 リセット (同時リセット) を押す SPモータ使用時間のリセット ストップ状態で、本体 t2_0000 を押す 光ピックアップ交換時のお願い 光ピックアップは体に帯電している静電気等で破壊される 4. 光ピックアップのフレキシブルケーブルにあるラン 場合があります。光ピックアップ周辺を修理する場合は静 ドを半田付けします。 電気保護対策を行なった上で実施してください。 (静電気 注意 保護対策についてのページを参照してください。)...
  • Page 18 DVD-S840 SELF-DIAGNOSIS FUNCTION AND SERVICE MODES 1. Service Mode Table Pressing various button combinations on the player and remote control unit can activate the service modes. Note: For jitter check, load the DVD test disc or the CD test disc. (See page 41)
  • Page 19: 自己診断機能とサービスモード

    DVD-S840 ■自己診断機能とサービスモード 1. モード一覧 本体ボタンとリモコンボタンの組合わせでそれぞれのモードが活用できます。 注) ジッタチェックには、DVDテストディスクまたはCDテストディスクを使用します。 (41ページ参照)...
  • Page 20 DVD-S840 Use of operation time display function When repairing a trouble, check these figures and use them for reference. When performing replacement, be sure to check the total operation time and reset only for the part replaced.
  • Page 21 DVD-S840 使用時間表示機能の活用 故障修理時には、これらの時間を確認し故障診断の参考にしてください。 修理交換時には、必ず使用時間を確認し、交換後は使用時間をリセットしてください。...
  • Page 22 DVD-S840 2. Servo Process Flow LD: Laser Diode 3. Servo Process Display Mode In starting operation of the player, a number is allotted to each servo process so that the operation of each step can be seen. Use that number in combination with the error code, RAM learned value in ADSC and others for reference when diagnosing troubles.
  • Page 23 DVD-S840 2. サーボプロセスのフロー LD:レーザーダイオード 3. サーボプロセス表示モード プレーヤの立上げ動作において各サーボプロセスに番号を割り当てて、各ステップ動作を見えるようにしました。 エラーコードやADSC内部RAM学習値等と組み合わせて故障診断の参考にしてください。 各プロセスと表示番号の関係は次のようになっています。...
  • Page 24: Sales Demonstration Lock Function

    DVD-S840 4. Sales Demonstration Lock Function This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function. "LOCK" is displayed on the unit, and ordinary operation is disabled. 4.1. Setting The sales demonstration lock is set by simultaneously pressing the "...
  • Page 25 DVD-S840 4. 店頭ロック機能 店頭展示等でディスクの紛失を防止するための機能で 「ディスクの取り出し」 が出来なくなります。操作しようとすると本体 には 「LOCK」 を表示され操作できなくなります。 4.1. 設定方法 本体の 「a a a a a 」 キーを押しながらリモコンの 「POWER」 を長押しすると店頭ロック機能が働きます。 (ロック機能が働くと 「LOCK」 を表示します。) 4.2. 解除方法 設定方法と同じ操作を行なうと解除することができます。 (ロック機能が解除されると 「UNLOCK」 を表示します。) ( 電源コンセントを抜いても解除できません。) 5. サービス時の注意事項 5.1. DVD プレーヤ本体修理後のリカバリー処置について モジュールP板および、モジュールP板内のFROM, EEPROM等を交換した場合はドライブを最適化するためにリカバリー ディスク処置を実施してください。...
  • Page 26: Error Code

    DVD-S840 7. Error Code Error Code Error Content Additional error explanation Defect 1 Defect 2 Defect 3 Defect 4 U, H error Focus error Tray loading error Spindle servo error (Spindle servo, DSC (IC2001) SP motor, CLV servo error) Traverse servo error...
  • Page 27 DVD-S840 7. エラーコード エラー内容 エラー補足説明 不良箇所1 不良箇所2 不良箇所3 不良箇所4 U,Hエラー U11 フォーカスエラー H01 トレイローディングエラー H02 スピンドルサーボエラー スピンドルサーボ、DSC (IC2001) SPモータ、CLVサーボエラー H03 トラバースサーボエラー H04 トラッキングサーボエラー H05 シークエラー パネルコントロールとシステムコントロール通信エラーで H06 電源エラー 電源OFFできない H07 スピンドルモーター駆動エラー DSC関連 F500 DSCエラー サーボエラー発生でDSC停止(立上げ、フォーカスエラー等) OPU ADSC (IC2001) FEP (IC5201) サーボドライブ...
  • Page 28: Last Error Code Saved During No Play

    DVD-S840 Error Code Error Content Additional error explanation Defect 1 Defect 2 Defect 3 Defect 4 F880 Task number is not Message coming from a non-existing task appropriate F890 Sending message when Sending message to AV task message is being sent...
  • Page 29 DVD-S840 エラー内容 エラー補足説明 不良箇所1 不良箇所2 不良箇所3 不良箇所4 存在しないタスクからメッセージがきたとき F880 タスク番号が適切でない (エラー停止、ファームバグ修正要) AVタスクへ送信中にメッセージを AVタスクへメッセージ送信中(エラー停止、ファーム F890 送信しようとした バグ修正要) AVタスクへのメッセージ送信が AVタスクへメッセージ送信開始(エラー停止、ファーム F891 できなかった バグ修正要) F893 FROM改ざん FROM (IC6301) CPU(IC6201) シリアル通信 F894 EEPROM異常 EEPROM(IC6221) ライン F895 言語エリア異常 FROM (IC6301) ジャンパー(※2) 失敗防止のため出荷時に調整されています F896 該当モデル無し ジャンパー(※2)...
  • Page 30: Assembling And Disassembling The Mechanism Unit メカニズムユニットの分解組立

    DVD-S840 ASSEMBLING AND DISASSEMBLING THE MECHANISM UNIT メカニズムユニットの分解組立 1. Disassembly Procedure 1. 分解手順 Disassembling the exterior part (Refer to "DISASSEMBLY PROCEDURES AND SERVICE POSITION") INTERMEDIATE P.C.B. Clamp Plate Unit Tray Traverse Block Traverse Gear B, C Optical Pickup Unit Middle Chassis...
  • Page 31 DVD-S840 2. INTERMEDIATE P.C.B. 2. 中継P.C.B. 1. Remove the screws. 1. ねじを外す。 2. Remove the solder from the motor connections. 2. はんだを取り除く。 3. Remove the connectors. 3. コネクターを外す。 Solder Connector はんだ コネクター Screw ねじ Connector INTERMEDIATE P.C.B. コネクター 中継P.C.B. <Mechanism unit bottom>...
  • Page 32 DVD-S840 4. Tray 4. トレイ Lift the tray. トレイを持ち上げる。 Tray / トレイ <Precautions in Reassembling the Tray> <トレイ組立ての注意点> • Reassemble the tray so that it is in the backmost ●トレイが最後端位置になるように組立てる。 position. 1. カムギアのレバーの位置とメカシャーシユニットのレ バー合わせ位置 (メカシャーシユニットの端) が合うよう 1. Turn traverse gear until cam gear lever comes to the lever adjusting position at the end of the mechanical にトラバースギアを回転させる。...
  • Page 33 DVD-S840 a. トレイを奥よりかぶせる。 a. Place the tray on the unit from rearward. Tray トレイ (Rear side) (後方) (Front side) (前方) b. トレイを手前へ少しずつ押し、位相凸と位相凹を合わせ b. Inch the tray frontward until convex phase and concave phase mate. る。 (Rear side) (後方) (Front side) Tray (前方)...
  • Page 34: Traverse Block

    DVD-S840 5. Traverse Block 5. トラバースブロック 1. Lift the traverse block while spreading the hook of the 1. メカシャーシユニットのフックを手で広げながら、トラ mechanical chassis unit. バースブロックを持ち上げる。 2. Disengage the tabs from the holes of the mechanical 2. ツメをメカシャーシユニットの孔から外す。 chassis unit. <トラバースブロック組立ての注意点> <Precautions on Reassembling the Traverse ●...
  • Page 35 DVD-S840 6. Traverse Gear B, C 6. トラバースギアB、C 1. Disengage the tabs from the traverse gear. 1. トラバースギアのツメを外す。 2. Remove the traverse gears B and C. 2. トラバースギアB、C を外す。 Tab of traverse gear トラバースギアのツメ <Traverse block bottom> Traverse gears B and C 〈トラバースブロック底部〉...
  • Page 36 DVD-S840 7.1 光ピックアップ交換時の注意 7.1 Precautions on Optical Pickup Replacement The optical pickup can be damaged by static electricity 光ピックアップは体に帯電している静電気等で破壊される from your body. Be sure to take static electricity 場合があります。光ピックアップ周辺を修理する場合は静 電気保護対策を行った上で実施してください。 (静電気対 countermeasures when working around the optical pickup. (Refer to the related page in this Manual about the 策についてのページを参照してください。)...
  • Page 37 DVD-S840 7.2 光ピックアップユニットの分解手順 7.2 Disassembling the Optical Pickup Unit 1. Remove 2 screws A and remove the TRV feed rack. 1. ねじA (2本) を外し、TRV送りラックを外す。 2. Remove the screw B and remove the Terminal FPC. 2. ねじB (1本) を外し、中継FPCを外す。 3. 光ピックアップを外す。...
  • Page 38 DVD-S840 3. 光ピックアップユニット、スプリング、ドライブシャフ 3. Install the optical pickup unit, spring drive shaft, guide shaft, rubber cushion, and spring holder on the traverse ト、ガイドシャフト、クッションゴム、スプリングホル block. ダーをトラバースブロックに取り付ける。 Spring holder (spring) スプリングホルダー (スプリング) Optical pickup unit 光ピックアップユニット Rubber cushion クッションゴム (Rear side) Spring holder (spring) (後方)...
  • Page 39 DVD-S840 4. 光ピックアップの静電対策用フレキを切断する。 4. Cut the antistatic flexible sheet for the optical pickup unit. Cutting line 切断ライン Antistatic FPC 静電対策FPC...
  • Page 40 DVD-S840 8. Disassembling the Middle Chassis 8. ミドルシャーシ 1. Remove the holder pins. 1. 押えピンを外す。 2. Remove the tab. 2. ツメを外す。 3. Lift up the upper part in the direction of the arrow. 3. 矢印の方向に引きながら持ち上げる。 Holder pin 押えピン ツメ Middle chassis ミドルシャーシ...
  • Page 41: Service Tools And Equipment

    DVD-S840 ADJUSTMENT / 調整 1. Service Tools and Equipment 1. 調整に必要な機器 Application Name Number 用  途 品    名 品     番 Tilt adjustment DVD test disc DVDT-S15 (AAX07320) or DVDT-S01 (TX946080) あおり調整 DVD テストディスク DVDT-S15 ( AAX07320) またはDVDT-S01 ( TX946080) Hex wrench JZS0100 (TX946380) 六角レンチ...
  • Page 42 DVD-S840 3. Storing and Handling Test Discs 3. テストディスクの保管・管理について • Surface precision is vital for DVD test discs. Be sure to ・ DVD テストディスクは平面精度が要求されます。保管 store and handle them carefully. 管理にはご注意いただきますようお願いします。 1. Do not place discs directly onto the workbench, etc., 1.
  • Page 43: Adjustment

    DVD-S840 4.2. ポイント 4.2. Important Points 1. Make tangential adjustment first, and then make tilt 1. タンジェンシャル側を先に調整してからチルト側を調整 adjustment. します。 2. 最良点を見つけるために2、3 回繰り返してください。 2. Repeat adjusting two or three times to find the optimum point. 3. 最後にチルト調整で終わってください。 3. Finish the procedure with tilt adjustment.
  • Page 44 DVD-S840 4.4. ネジロックの方法 4.4. Procedure for Screw Lock 1. After adjustment, remove the top cover, tray, clamper 1. 調整終了後、トップカバー、トレイ、クランパーベース base and traverse unit in this sequence. ユニット、トラバースユニットを順番に分解します。 2. トラバースユニットを裏返してネジロックで調整ねじを 2. Lay the traverse unit upside down, and lock the adjustment screw with screw lock.
  • Page 45: Abbreviations / 略語表

    DVD-S840 ABBREVIATIONS / 略語表 ABBREVIATIONS / 略語 DEFINITIONS 内容 A0∼UP ADDRESS アドレス ACLK AUDIO CLOCK オーディオクロック AD0∼UP ADDRESS BUS アドレスバス ADATA AUDIO PACKET DATA オーディオパケットデータ ADDRESS LATCH ENABLE アドレスラッチイネーブル AMUTE AUDIO MUTE オーディオミュート AREQ AUDIO PACKET REQUEST オーディオパケット要求信号 AUDIO RF オーディオRF...
  • Page 46 DVD-S840 ABBREVIATIONS / 略語 DEFINITIONS 内容 FBAL FOCUS BALANCE フォーカスバランス制御 FCLK FRAME CLOCK フレームクロック FOCUS ERROR フォーカスエラー FOCUS ERROR AMP INVERTED INPUT フォーカスエラーアンプ入力 FOCUS ERROR AMP OUTPUT フォーカスエラーアンプ出力 FREQUENCY GENERATOR 周波数発生器 FREQUENCY SUB CARRIER 周波数サブキャリー FSCK FS (384 OVER SAMPLING) CLOCK FS (384オーバーサンプリング)...
  • Page 47 DVD-S840 ABBREVIATIONS / 略語 DEFINITIONS 内容 SOUT1,2 SERIAL DATA OUT シリアルデータ出力 SPDI SERIAL PORT DATA INPUT シリアルポートデータ入力 SPDO SERIAL PORT DATA OUTPUT シリアルポートデータ出力 SPEN SERIAL PORT R/W ENABLE シリアルポートR/Wイネーブル SPRCLK SERIAL PORT READ CLOCK シリアルポートリードクロック SPWCLK SERIAL PORT WRITE CLOCK シリアルポートライトクロック...
  • Page 48: Block Diagram

    DVD-S840 BLOCK DIAGRAM OVERALL BLOCK DIAGRAM MECHANISM UNIT MODULE P.C.B. TERMINAL P.C.B. INTERMEDIATE P.C.B. IC5201 IC2001 IC3001 IC4211 FRONT OPTICAL MIX L PICK UP PROCESSOR UNIT (FEP) MIX R (DATA BUS) IC2501 ACTUATOR SPINDLE AUDIO MOTOR MOTOR CONVERTER DRIVE TRAVERSE...
  • Page 49 DVD-S840 POWER BLOCK DIAGRAM PRIMARY CIRCUIT SECONDARY CIRCUIT IC6001 (OPERATION CPU) L1001 D1011 ,C1011,C1012 T1021 AC SOCKET QR6052 NSW-10V D6103 P1001 STBY-LED STBY STANDBY/ON DRIVE D1002 NSW+10V SURGE LINE RECTIFIER KILLER FILTER IC1125 POWER TRANSFORMER (REG.D+2.5V) F1001 D+2.5V ON/OFF QR6056...
  • Page 50 DVD-S840 SERVO BLOCK DIAGRAM RF SIGNAL MOTOR DRIVE SIGNAL TRACKING ERROR SIGNAL FOCUS ERROR SIGNAL IC2501 IC2001 IC5201 (MOTOR DRIVE) (DSC/ODC) (FEP) REFNV PEAK TESTSG TSTSG VO4+ DCAGC M2502 HOLD DCFLT TRAVERSE MOTOR LEVEL RSCL S LINE TRVSIN TRIN VO4-...
  • Page 51 DVD-S840 VIDEO BLOCK DIAGRAM 1/2 INTERMEDIATE P.C.B. MODULE P.C.B. OPTICAL PICK UP UNIT IC5201 IC2001 IC3001 IC3062 (FEP) (DSC/ODC) (AV DECORDER) (64M SDRAM) RFENV VIN1 RF ENV RFENV HDD8 STD0 VIN2 HDD9 STD1 VIN3 HDD10 STD2 VIN4 DAC4 OUT HOLD...
  • Page 52 DVD-S840 VIDEO BLOCK DIAGRAM 2/2 MODULE P.C.B. TERMINAL P.C.B. MAIN SIGNAL IC3501-29,30 IC3501-32 IC3501-24,25 2.2Vp-p(20usec./div.) 1.8Vp-p(20usec./div.) 1.9Vp-p(20usec./div.) IC3501 (VIDEO BUFFER) YTRAP YOUT1 CLAMP YOUT2 MIXOUT1 JK4501 VIDEO OUT MIXOUT2 CTRAP Q3116 CB/PB COUT 1.5-6M JK4501 S-VIDEO OUT Q3121 CR/PR Q3111...
  • Page 53 DVD-S840 AUDIO BLOCK DIAGRAM IC3001 (AV DECODER) MODULE P.C.B. TERMINAL P.C.B. MAIN SIGNAL IC6201 (MAIN CPU) AMUTE NBREQ SBO1 SBT1 SBIO SBI1 NRST IC4211 (AUDIO DAC) ADOUT0 DIN1 IC4302 JK4501 FRONT VOUT1 LOUT IC4302 FRONT VOUT2 ROUT IC4303 JK4501 SURROUND...
  • Page 54: Interconnection Schematic Diagram

    DVD-S840 INTERCONNECTION SCHEMATIC DIAGRAM INTERMEDIATE P.C.B. FP2501 FP5102 FP5201 3.3VHFM 3.3VHFM FG UNIT A GND A GND LPC01 LPC01 A GND A GND F1(DVD) F1(DVD) F2(DVD) F2(DVD) GAINH/L GAINH/L PIN(DVD) PIN(DVD) VREF2.2V VREF2.2V TRAY/TRV TRAY/TRV OPTICAL TA(DVD) TA(DVD) TD(DVD) TD(DVD)
  • Page 55: Printed Circuit Board

    DVD-S840 PRINTED CIRCUIT BOARD Q1021 QR6057 C-2 TC6005 C-1 TC6015 D-1 TC6025 D-1 TC6035 E-1 TC6049 E-3 TC6059 E-3 TC6087 D-2 TL1112 A-3 TP1104 D-4 TP1116 A-4 Q1051 IC1101 TC6006 C-1 TC6016 D-1 TC6026 D-1 TC6036 E-1 TC6050 C-3 TC6060 E-4...
  • Page 56 DVD-S840 PRINTED CIRCUIT BOARD TERMINAL P.C.B. J model only Q4302 Q4315 Q4410 QR3573 FC1001B C3533 Q4413 R3579 QR3523 R3528 Q4414 W601 Q4415 W602 TL1212 W603 Q4416 QR3571 K3581 W401 Q4417 QR3572 Q4418 R3576 TL1209 Q4419 W301 Q4751 W204 R3578 W302...
  • Page 57 DVD-S840 PRINTED CIRCUIT BOARD MODULE P.C.B. 1/2 (COMPONENT SIDE) IC2101 IC3001 IC3091 IC5201 IC6201 IC6211 IC6221 IC6222 IC6223 IC6251 IC6252 IC6253 PS6201 Q3212 Q3217 Q3222 Q6215 QR5241 D3091 D6215...
  • Page 58 DVD-S840 PRINTED CIRCUIT BOARD MODULE P.C.B. 2/2 (FOIL SIDE) IC2001 IC3041 IC3061 IC3062 IC4201 IC4211 IC6301 IC6501 IC6502 IC6503 IC6521 IC6522 IC6523 IC6542 IC6543 IC6544 IC6545 IC6561 PS3201 PS4201 Q2001 Q3101 Q3106 Q3111 Q3116 Q3121 Q5271 QR5221 D2001 D6501 D6521...
  • Page 59 DVD-S840 PRINTED CIRCUIT BOARD INTERMEDIATE P.C.B. 1/2 (COMPONENT SIDE) INTERMEDIATE P.C.B. 2/2 (FOIL SIDE) Q5111 TC5120 IC2501 TC2525 TC5113 TP5103 TP5112 TP5121 TP5130 Q5115 TC5121 CP5101 TC5102 TC5114 TP5104 TP5113 TP5122 TP5131 TC5101 TC5123 CP5102 TC5103 TC5118 TP5105 TP5114 TP5123...
  • Page 60 DVD-S840 PRINTED CIRCUIT BOARD FRONT 1 P.C.B. FRONT 2 P.C.B.
  • Page 61: Schematic Diagram

    DVD-S840 SCHEMATIC DIAGRAM POWER P.C.B. 1/2 (POWER SECTION) AC120V, 60Hz (U model) AC100V, 50/60Hz (J model)
  • Page 62 DVD-S840 SCHEMATIC DIAGRAM POWER P.C.B. 2/2 (OPERATION SECTION) Page 73 Page 63 Page 73 Page 63...
  • Page 63 DVD-S840 SCHEMATIC DIAGRAM TERMINAL P.C.B. 1/3 (VIDEO OUT SECTION) Page 62 Page 69 Page 62 J model only Page 73...
  • Page 64 DVD-S840 SCHEMATIC DIAGRAM TERMINAL P.C.B. 2/3 (AUDIO OUT 1 SECTION) Page 70...
  • Page 65 DVD-S840 SCHEMATIC DIAGRAM TERMINAL P.C.B. 3/3 (AUDIO OUT 2 SECTION)
  • Page 66 DVD-S840 SCHEMATIC DIAGRAM MODULE P.C.B. 1/6 (FEP SECTION) Page 72 TO FP5102 INTERMEDIATE P.C.B...
  • Page 67 DVD-S840 SCHEMATIC DIAGRAM MODULE P.C.B. 2/6 (SODC SECTION)
  • Page 68 DVD-S840 SCHEMATIC DIAGRAM MODULE P.C.B. 3/6 (AVDEC SECTION)
  • Page 69 DVD-S840 SCHEMATIC DIAGRAM MODULE P.C.B. 4/6 (VIDEO-DAC SECTION) Page 63 TO PP3201 TERMINAL P.C.B (VIDEO OUT SECTION)
  • Page 70 DVD-S840 SCHEMATIC DIAGRAM MODULE P.C.B. 5/6 (AUDIO DAC SECTION) Page 64 TO PP4301 TERMINAL P.C.B (AUDIO OUT1 SECTION)
  • Page 71 DVD-S840 SCHEMATIC DIAGRAM MODULE P.C.B. 6/6 (CPU SECTION)
  • Page 72 DVD-S840 SCHEMATIC DIAGRAM INTERMEDIATE P.C.B. Page 66...
  • Page 73 DVD-S840 SCHEMATIC DIAGRAM FRONT 1 and FRONT 2 P.C.B. FRONT 1 P.C.B. Page 62 Page 62 TO PS6001 TO PS6002 POWER P.C.B POWER P.C.B (OPERATION SECTION) (OPERATION SECTION) FRONT 2 P.C.B. Page 63 TO PS6003 TERMINAL P.C.B 1/3 (VIDEO OUT SECTION)
  • Page 74: Voltage Chart / 電圧表

    DVD-S840 VOLTAGE CHART / 電圧表 2. TERMINAL P.C.B. 1. POWER P.C.B. IC3501 Ref No. Ref No. IC1101 IC1125 IC1151 MODE MODE PLAY PLAY STOP STOP Ref No. IC6001 Ref No. IC3501 IC3581 MODE MODE PLAY PLAY STOP STOP IC6001 Ref No.
  • Page 75: Parts List

    DVD-S840 PARTS LIST ELECTRICAL PARTS WARNING Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. ●s印のある部分は、 安全確保部品を示 しています。 部品の交換が必要な場合、 パーツ リ ス トに記載されている部品を使用 して く ださい。 ●部品価格ランクは、 予告な く 変更するこ とがあ り ます。...
  • Page 76 DVD-S840 P.C.B. Schm Ref. PART NO. Description Remarks Markets 部 品 名 Rank AAX49950 P.C.B. MODULE REP3384A PCB モジュール AAX49960 P.C.B. MODULE REP3384D PCB モジュール AAX49930 P.C.B. POWER REP3389KA PCB パワー AAX49940 P.C.B. POWER REP3389LA PCB パワー AAX49910 P.C.B. TERMINAL REP3389KB PCB ターミナル AAX49920 P.C.B. TERMINAL REP3389LB PCB ターミナル...
  • Page 77 DVD-S840 P.C.B. Schm Ref. PART NO. Description Remarks Markets 部 品 名 Rank C4414-17 AAX44710 C.EL 47uF 6.3V VCEA0JAE470B ケミコン C4419-22 AAX44700 C.EL 47uF F2A1E470A205 ケミコン C4751,52 AAX44700 C.EL 47uF F2A1E470A205 ケミコン C4781 UR817470 C.EL 47uF 6.3V ケミコン C4902 UR848100 C.EL 100uF ケミコン...
  • Page 78 DVD-S840 P.C.B. Schm Ref. PART NO. Description Remarks Markets 部 品 名 Rank D6215 AAX34230 DIODE MA2J72800L MA2J72800L ダイオード DL6001 AAX45580 FL.DSPLY FV779GN A2BB00000103 蛍光表示管 DZ1001 AAX49980 SURG.PRTCT VSQ1003-F J0LE00000023 サージアブソーバー * s F1001 AAX50020 FUSE 1.6A 125V K5D162AQ0005 ヒューズ s F1001...
  • Page 79 DVD-S840 P.C.B. Schm Ref. PART NO. Description Remarks Markets 部 品 名 Rank Q4410 AAX45120 2SD1328 2SD132800L トランジスタ Q4413,14 AAX45120 2SD1328 2SD132800L トランジスタ Q4415-18 AAX04280 2SD601A-R 2SD601A-R トランジスタ Q4419 AAX45120 2SD1328 2SD132800L トランジスタ Q4751 AAX04280 2SD601A-R 2SD601A-R トランジスタ Q4901 AAX45140 2SD1862 2SD1862QRTV2 トランジスタ...
  • Page 80 DVD-S840 Parts List for Chip Ceramic Capacitors Value Part NO Value Part NO US060200 680pF US062680 US060300 820pF US062820 US060500 1000pF US063100 US060600 1200pF US063120 US060700 1500pF US063150 US060800 1800pF US063180 10pF US061100 2200pF US063220 12pF US061120 2400p UB053240 15pF...
  • Page 81 DVD-S840 Parts List for Chip Carbon Resistors Value 1/10W Type Part No. Value 1/10W Type Part No. Value 1/16W Type Part No. 0 Ω 0 Ω 0000 4.3 kΩ 6430 1040 RD35 RD35 HX61 1.0 Ω 1 Ω 3100 4.7 kΩ...
  • Page 82: Exploded View

    DVD-S840 EXPLODED VIEW...
  • Page 83: Mechanical Parts

    DVD-S840 MECHANICAL PARTS Schm Ref. PART NO. Description Remarks Markets 部 品 名 Rank AAX45060 TOP COVER RKM0478-N トップカバー AAX45050 TOP COVER RKM0478-K トップカバー EX603920 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2BL VHD0690 ボンディングBタイトネジ EX603960 SPECIAL SCREW 3x8 GD VHD1094 特殊ネジ EX603940...
  • Page 84 DVD-S840 DVD-MECHANISM EXPLODED VIEW...
  • Page 85 DVD-S840 DVD-MECHANISM PARTS Schm Ref. PART NO. Description Remarks Markets 部 品 名 Rank AAX26270 SPINDLE MOTOR ASS'Y RXQ0742 SモーターASSY AAX27590 FIXED PIN RMS0712 固定ピン AAX45650 P.C.B. ASS'Y INTERMEDIATE REP3406AN 中継基板 106-1 AAX26260 PCB RUBBER RMG0558K PCBラバー AAX45280 SCREW RHD20060 ネジ AAX27340...
  • Page 86 DVD-S840 本资料由OKXIA视听皮带资源库www.okxia.cn提供...

Table of Contents