Installation; Wired Controller Wiring Instructions; Wired Controller Wiring; Communication Wiring - Haier YR-E16b User Manual

4 3/4 (120)
13/16 (21.44)
1 7/8 (47.4)
3 3/4 (95.74)

Wired Controller Wiring

1. Hold the front of the controller, push down the back cover to
open the back cover of the controller.
2. Put communication wire through the hole in the back cover.
3. Fix the back cover.
4. Connect communication wire to CON4 port of wired
controller.
5. Finally put the front cover of wired controller to back cover
to complete the installation.
Note: the battery is non-removable and recharges while the unit
is connected to power in order to save user settings if there is a
power outage.
Page 4

INSTALLATION

Wired Controller Wiring Instructions

11/16 (17.8)
7/16 (11.8)

Communication Wiring

Length
0~100 ft (0~30m)
100~200 ft (30~60m)
200~300 ft (0~90m)
300-400 ft (90~120m)
400~500 ft (120~150m)
WIRED CONTROLLER
Communication Wiring
Dimension of Wiring
22AWG(0.3mm
shielded wire
20AWG(0.5mm
shielded wire
18AWG(0.75mm
shielded wire
16AWG(1.25mm
shielded wire
14AWG(2mm
shielded wire
)x3-core
2
)x3-core
2
)x3-core
2
)x3-core
2
)x3-core
2