Philips BDL5545E Service Manual page 20

Color
Note: For HDMI-Video timing, DVI-D(HD timing), DP(HD timing) and
Adjust to increase or decrease the intensity of colors in the image.
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust.
Press the PLUS button to increase color intensity, or press the MINUS button to decrease color
intensity.
Color temperature
Select a color temperature for the image. A lower color temperature will have a reddish tint, whilst a
higher color temperature gives off a more bluish tint.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
5000K
10000K
Color control
Note: This function is only available when Color temperature is set to User.
With this function you can adjust the color tones of the image precisely by changing the R (Red), G
(Green) and B (Blue) settings independently.
Press the SET/PLUS button to open the submenu. Press the UP/DOWN button to select User-R,
User-G or User-B, and press the PLUS/MINUS button to adjust.
Light sensor
Choose to enable or disable the ambient light sensor. Once enabled, the image brightness will be
adjusted automatically when ambient lighting condition changes.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make
selection.
Smart contrast
Note: Light sensor and Smart contrast cannot be on at the same time.
When turned on, this function helps enhance image contrast when displaying dark scenes.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make
selection.
Smart picture
The following smart picture modes are available for
PC mode: Standard, Highbright and sRGB.
Video mode: Standard, Highbright and Cinema.
Video source
Select a video input source.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Display Port
HDMI
6500K
Native
DVI-D
Component
Component
7500K
User
Card OPS
Philips BDL5545E
inputs only.
9300K
VGA
19