Hitachi WirelessIP 3000 Administrator's Manual page 8

Chapter 1
Administrator
Network
Settings
4
Select encryption type.
Select "None", "WEP" or "WPA-PSK" using the
confirm using the
If returning to the previous screen, press the
If "WEP" is selected, a screen for performing settings related to WEP is displayed.
Input the values as prompted on screen.
If "WPA-PSK" is selected, a screen for inputting a pre-shared key is displayed. Input
the values as prompted on screen.
Finally, press the
5
Configure the settings for TCP/IP.
For "Use DHCP", select "Disabled" or "Enabled" using the
If returning to the previous screen, press the
If "Disabled" is selected, the screen for setting the IP address is selected. Input the
value as prompted on screen.
Finally, press the
key.
key.
key.
keys of the key, and
key.
keys.
key.
- 1-5 -