KX-TSC11CB Note: Because CONTENTS 3 to 8 are the extracts from the Operating Instructions of this model, they are subject to change without notice. Please refer to the original Operating Instructions for further information. CONTENTS Page Page 1 FOR SERVICE TECHNICIANS 6.5.
KX-TSC11CB 1 FOR SERVICE TECHNICIANS ICs and LSIs are vulnerable to static electricity. When replacing, the following precautions will help prevent recurring malfunctions. 1. Cover the plastic parts boxes with aluminum foil. 2. Ground the soldering irons. 3. Use a conductive mat on the worktable.
6.1. Connecting the Handset/Telephone Line Cord · Use only a Panasonic Handset for the KX-TSC11CB. · Use only a telephone line cord included with the unit. · If your unit is connected to a PBX which does not support Call Display services, you cannot access those services.
KX-TSC11CB 6.5. Call Restriction For Service Hint: *: If the current password is forgotten, reter to How to Release the Establishment of Password (P.9).
KX-TSC11CB 10 FOR SCHEMATIC DIAGRAM 1. SW101: Hook switch. 2. SW1: Ringer selector. 3. DC voltage measurements are taken with electronic voltmeter from negative voltage line. 4. (Add 40 mA to telephone line from the loop simulator.) 5. Off-hook condition 6.