Panasonic DBS 576 User Manual page 26

2. Setting Up Your Phone
Table 5. Characters allowed when assigning PSD numbers
To insert a . . .
Digit or character
Intercom Level*
MCO Code**
Pause
DP-DTM Code
SSD Code
Hyphen (-) (Appears when the number is dialed or
checked, but not during programming.)
Display Number (Start/Stop)***
DTMF Conversion After the Other Party Answers
* Indicates that the digits that follow are either a feature access code or extension
number. (Do not include if system is set for Intercom Level.)
** Indicates that the digits that follow are for an outside number. (Do not include if
system is set for CO Level.)
*** Indicates that the enclosed digits should not be displayed during dialing. Must
precede and follow the digits that you do not want displayed. Example: AUTO *2
555-4143 AUTO *2
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key
To delete a PSD number assigned to a one-touch or soft key
Note: When deleting a PSD number from a non-display phone, be sure to record
the change in your personalized list of PSD numbers. (See Appendix B.
"Customized PSD Bin Numbers.")
1. Pick up the handset or press the ON/OFF key.
2. Either:
•
Press the PROG key and then press the AUTO key.
26 DBS 576 (USA), issued January 1999
Enter/Press...
0, 1-9, *, #
AUTO * #
AUTO * 0
REDIAL
AUTO * *
AUTO
NN(N)
PROG
AUTO * 2
AUTO * 3
Version 2.5 or higher)
OR
576-25-750