Specifications - NEC MultiSync MS125 User Manual

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Composite sync
Sync on Green:
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
MS125 Manual.wpc
MultiSync ® 125
Monitor
Diagonal: 21.0 inch
20.0 inch
Radius: 1730 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Positive/Negative
Unlimited number of Colors
31 kHz to 96 kHz
Vertical: 55 Hz to 200 Hz
640 x 480 @ 70 to 188 Hz
720 x 400 @ 55 to 160 Hz
800 x 600 @ 55 to 152 Hz
1024 x 768 @ 55 to 120 Hz
1152 x 870 @ 55 to 105 Hz
1280 x 1024 @ 55 to 89 Hz ..................... NEC cites recommended resolution at
1600 x 1200 @ 55 to 76 Hz
390 mm/15.4 inches
Vertical: 293 mm/11.5 inches
406 mm/16.0 inches
305 mm/12.0 inches
AC 100 – 240 V, 50-60 Hz
2.5A @ 100 – 240 V
498 mm (W) x 510 mm (H) x 512 mm (D)
19.6 inches (W) x 20.1 inches (H) x 20.2 inches (D)
30 kg
66.1 lbs
0°C to +35°C
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
-20°C to +60°C
Humidity: 0% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
9
11
™ Notes
90° deflection, 0.25 mm trio dot pitch,
medium short persistence phosphor,
multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear ® screen surface.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
85 Hz for optimal display performance
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
5/7/01, 3:34 PM