Pioneer avic-d1 Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Navigation system
  5. AVIC-D1
  6. Service manual

Pioneer avic-d1 Service Manual

Hide thumbs Also See for avic-d1:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Operating Manual
DOUBLE-DIN DVD NAVIGATION SYSTEM
AVIC-D1
This service manual should be used together with the following manual(s):
Model No.
Order No.
CX-3016
CRT3056
CX-3158
CRT3394
This product has the unit part number as below.
Unit Part No.
Description
CPN1951
Navigation Unit
*) The unit part numbers listed above are not for the service components.
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
Mech.Module
MS3
DVD Mech. Module:Circuit Description, Mech. Description, Disassembly
S10.1AAC
CD Mech. Module:Circuit Description, Mech. Description, Disassembly
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
AVIC-D1/UC
/UC
Remarks
K-ZZW. APR. 2005 Printed in Japan
ORDER NO.
CRT3466

Advertisement

Table of Contents
loading

Related Manuals for Pioneer avic-d1

Summary of Contents for Pioneer avic-d1

  • Page 1 PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2005 K-ZZW.

  • Page 2: Safety Information

    2. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment (shorting-solder) by referring to "the DISASSEMBLY". 3. After replacing the pickup unit, be sure to check the grating. is a trademark of DVD Format/Logo Licensing Corporation. AVIC-D1/UC...
  • Page 3 To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual. AVIC-D1/UC...

  • Page 4: Table Of Contents

    7.1 DIAGNOSIS ............................221 7.1.1 DISASSEMBLY ........................... 221 7.1.2 PCB LOCATIONS ..........................231 7.1.3 CONNECTOR FUNCTION DESCRIPTION ..................232 7.2 IC ................................233 7.3 EXPLANATION ............................258 7.3.1 MECHANISM DESCRIPTIONS ......................258 7.3.2 OPERATIONAL FLOW CHART ......................264 8. OPERATIONS .............................. 266 AVIC-D1/UC...

  • Page 5: Specifications

    Angle adjustment ....0 – 21° MP3 decoding format..MPEG-1 & 2 Audio Layer 3 (initial settings: 0°) WMA decoding format ..Ver 7, 7.1, 8, 9 (2ch audio) Wave signal format....Linear-PCM, MS ADPCM FM tuner Frequency range....87.9 – 107.9 MHz AVIC-D1/UC...
  • Page 6 100 dBf) AM tuner Frequency range....530 – 1,710 kHz (10 kHz) Usable sensitivity....18 µV (S/N: 20 dB) Signal-to-noise ratio..... 65 dB (IHF-A network) Note: • Specifications and the design are subject to possible modifications without notice due to improvements. AVIC-D1/UC...
  • Page 7 AVIC-D1/UC...

  • Page 8: Exploded Views And Parts List

    • Screw adjacent to mark on the product are used for disassembly. • For the applying amount of lobricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.) 2.1 PACKING AVIC-D1/UC...
  • Page 9 - Be careful when ordering parts, as the following unit of this mainframe is described on several pages. Description Part No. PCB name Reference page and No. MONI_PANEL Unit CWM9920 MONITOR PCB Page 15 No. 18(1/2) KEYBOARD PCB Page 15 No. 18(2/2) PANEL PCB Page 11 No. 58 AVIC-D1/UC...

  • Page 10: Exterior (1)

    2.2 EXTERIOR (1) AVIC-D1/UC...
  • Page 11 FM/AM Tuner Unit CWE1646 Holder CND1054 Terminal(CN1302) CKF1064 Terminal(CN1303) CKF1064 Terminal(CN1304) CKF1064 Terminal(CN1305) CKF1064 Terminal(CN4301) CKF1064 Connector(CN1801) CKM1438 Connector(CN1401) CKM1460 Jack(CN1450) CKN1036 Connector(CN1803) CKS4822 Connector(CN1301) CKS4919 Connector(CN1651) CKS4980 Connector(CN1701) CKS5110 Connector(CN1802) CKS5270 Antenna Jack(CN4300) CKX1056 Holder CND2667 Holder CND2668 AVIC-D1/UC...

  • Page 12: Exterior (2)

    2.3 EXTERIOR (2) AVIC-D1/UC...
  • Page 13 CC Unit CWM9919 Terminal(CN100) CKF1064 Terminal(CN601) CKF1064 Terminal(CN602) CKF1064 Terminal(CN802) CKF1064 Connector(CN701) CKS3805 Connector(CN702) CKS3991 Connector(CN551) CKS4065 Connector(CN651) CKS4473 Connector(CN801) CKS4674 Connector(CN605) CKS5110 Holder CND2672 Shield CND2675 Shield CND2676 Shield CND2679 Shield CND2680 Sheet CNM6903 Insulator CNM9436 Insulator CNM9437 AVIC-D1/UC...

  • Page 14: Exterior (3)

    2.4 EXTERIOR (3) AVIC-D1/UC...
  • Page 15 CWX3229 Screw PMB20P040FTC Knob Unit CXC4417 Grille Unit CXC4434 Case Unit CXC4436 Sheet CNM9862 Button Unit(VOL) CXC4455 Button Unit(DEST, INFO) CXC4456 Cord CDE6825 CNS1472 Resistor RS1/2PMF102J Cord Assy CDE7838 CNV6727 Cord Assy CDE7839 > Fuse(10A) CEK1136 CNS1472 Shield CNM9858 AVIC-D1/UC...

  • Page 16: Dvd Mechanism Module(Ms3)

    2.5 DVD MECHANISM MODULE(MS3) AVIC-D1/UC...
  • Page 17 CNM8643 102 Screw(M1.7x1.2) CBA1572 Lever CNV8076 103 Arm CNV7742 Lever CNV7155 104 Arm CNV7743 CNV7156 105 Spring CBH2710 Rack CNV7157 106 Spring CBL1643 Clamper CNV7158 107 Spring CBH2712 CNV7159 108 Pickup Unit(Service)(Screw) GXX1234 CNV7160 109 Screw Assy CXX1750 CNV7161 AVIC-D1/UC...

  • Page 18: Cd Mechanism Module(S10.1Aaca)

    2.6 CD MECHANISM MODULE(S10.1AACA) 1GEM1024 2GEM1045 3GEM1035 AVIC-D1/UC...
  • Page 19 CND2712 Bracket CND1895 Screw JFZ20P020FTC CNC9968 Screw JGZ17P022FTC CND1909 ••••• Lever CND2032 Washer YE20FTC Pickup Unit(P10)(Service) CXX1641 Lever CNC9984 Sheet CNM8134 Screw IMS26P030FTC Collar CNV7798 Spring CBL1635 Guide CNV7799 Clamper CNV8372 CNV8403 Rack CNV8374 Holder CNV8376 Holder CNV8377 CNV8378 AVIC-D1/UC...

  • Page 20: Block Diagram And Schematic Diagram

    CN2806 FLPBUP FLPBUP FLPBUP FLPPW FLPPW FLPPW MOTPW OPENSW OPENSW OPENSW OPENSW HOMESW HOMESW CLOSESW CLOSESW CFSW CFSW CFSW CFSW PULSE1 PULSE1 PULSE1 PULSE1 PULSE0 PULSE0 PULSE0 PULSE0 MOT1 MOT1 MOT1 MOT1 MOT0 MOT0 MOT0 MOT0 CONNECTOR UNIT CN1701 AVIC-D1/UC...
  • Page 21 IC301 MEMLED MEMLED TC7SH08FUS1 CCON1 M51957BFP MFLPW0 MFLPW RST3 RSTOUT STBY2 Q803 Q301 FCONT TH601 DRAMPW STBY1 Q601 PWRFL VDD5 CN801 Q813 PWRFL PWRFL CCON1 CCON1 MFLPW0 Q814 PWRVI Q809 PWRVI PWRVI CN1802 FLPBUP Q806 BUPD1 SWACPW BUPV CN1701 AVIC-D1/UC...
  • Page 22 FMONV BUS+ DOUT CCON FANUP NAVIV FANUP STBN SWACPW SWACPW IPPW SYSPW VDORA85 Q1903 Q1902 3V → 5V FU1900 ILMPW IC1501 IC190 TC74VHCT08AFTS1 M5237 ILMPW SYSPWR Q1904 Q1922 FU1920 Q1943 (2/2) Q1923 Q1943 (1/2) (1/2) VDCONT Q1923 (2/2) CN605 AVIC-D1/UC...
  • Page 23 Q1901 (2/2) Q1902 VDORA85 Q1885 Q1842 Q1841 FANUP FU1840 IC1900 VDD5 M5237ML VDD5V REG. VDD2 SWACPW IC1840 S-812C50AUA-C3E MBUP Q1922 SWAC56 FU1823 VD83 BUPD SWAC56 Q1851 BACKUP2 FU1820 Q1923 Q1850 FLPBUP (1/2) (1/2) FU1821 PWRFL Q1850 FU1830 (2/2) PWRVI AVIC-D1/UC...
  • Page 24 PNLYV Q5683 (2/2) (BUP)V14 PNLXV D/D CONVERTER VSW5V IC5851 Q5682 2.5V REG. BD6171KV (1/2) V332 PVCC1 OUT2 IC5841 PVCC2 R1130H251B DVCC PVCC3 Q5682 PNLXV (2/2) PVCC4 PVCC5 3.3V PNLYV VSW5V Q5681 OUT1 (1/2) OUT3 OUT4 Q5681 PNLYV (2/2) OUT5 AVIC-D1/UC...
  • Page 25 KDT0 KDT0 KDT0 SOURCE VOL− VOL+ PVCC3 S5700 RESET PVCC4 HDRST HDRST HDRST PVCC5 3.3V REG. Q5702 1,2,5,6 Q5701 Q5831 OUT1 MEMLED MEMLED MEMLED V332 D5712 OUT3 OUT4 D5700-D5711 REMPWR REMPWR(5V) D5713-D5716 OUT5 VM12 VSW5V REMPWR ILMB ILMB ILMB(10V) AVIC-D1/UC...
  • Page 26 H3 + HALL_W − H3 − HALL_BIAS − COIL_U COIL_U COIL_W COIL_W COIL_V COIL_V CRGD1 CRGD2 CRGR1 CRGR2 COMPOUND UNIT(A) CN1202 12cm S1201 12cm S1202 Disc sens S1203 disc ditect Disc sens S1204 Photo S1205 COMPOUND UNIT(B) CLAMP SW S1206 AVIC-D1/UC...
  • Page 27 VO4( − ) OPIN1( − ) OUTPUT2 X401 16.00MHz MUTE VO1( − ) VO1( + ) IC404 VOL+,- TC7S08F 9 10 XRESET RESET ANI1 IC402 S-80827CNNB VCC33 -B8M ANI2 VCC5 3.3V REG DVD8 IC601 VCC33 BA033FP 1.8V REG IC602 VCC18 BA18BC0FP AVIC-D1/UC...
  • Page 28 18 19 20 21 IC 5 IC 3 EEPROM 3.3V 5.0V AM ANT FMRF IC 2 2.5V IC 1 FM ANT 3.3V FMRF MIXER, IF AMP DET, FM MPX RF adj ANT adj CF52 CF51 IC 4 3.3V 2.5V 2.5V 3.3V AVIC-D1/UC...
  • Page 29 IC 701 IC 301 BRST,BRXEN,BSRQ PE5454B BA5835FP BDATA,BSCK CN1301 12EJ VDCONT DSCSNS HOME VDCONT S904 S905 S903 S901 3V REGULATOR 12EJ DSCSNS HOME 3VDD IC 703 IC 203 S-812C33AUA-C2N V3R3D NJM2885DL1-33 3.3V REGULATOR IC 2 2.5V DET, FM MPX AVIC-D1/UC...
  • Page 30 8-12V Reg [CCON] [FANUP] typ 20mA (Max 60mA) FU1920 typ 200mA (Max 1000mA) 8.3V D/D 1.75A [VDCONT] typ 200m 5.6V Reg [CD3VON] SWAC56 Max 95mA 5.6V Reg [SWACPW] FU1821 PWRFL PWRVI FU1830 1A [FLAPILM] [ILMPW] FU1820 DRIVER Flap Motor [MOTPW] AVIC-D1/UC...
  • Page 31 ORA33 yp 172mA (Max 200mA) CD Core Unit 0mA (Max 60mA) VDD5 A (Max 1000mA) VD 8.3V typ 200mA VD2 5.6V Max 45mA Monitor µ-com Touch Panel Remote control sensor 20mA Back Light [MFLPW] [MEMOLED] Picture [SWACPW] Key LED AVIC-D1/UC...

  • Page 32: Overall Connection Diagram

    SYSTEM UNIT PANEL PCB AUDIO SYSCOM, VIDEO, I/F MECHANISM MODULE (S10.1AACA) CC UNIT CPU, ASIC, SDRAM GRAPHIC ROM, SRAM, BUS-BUFFER MECHANISM MODULE MAIN, CC CORE I/F (MS3) GPS, SENSOR, VIDEO, I/F TOUCH PANEL LCD PANEL MONITOR PCB KEYBOARD PCB AVIC-D1/UC...
  • Page 33 CORD ASSY Wired Remote ANTENNA IN FM/AM TUNER UNIT SUB WOOFER and NON FADER OUTPUT IN/OUT CORD ASSY EXTERNAL POWER IN/OUT SUPPLY XM TUNER etc. GPS UNIT GPS IN ANTENNA ASSY IP-BUS IP-BUS CONNECTOR UNIT AV-BUS AV-BUS MAIN PCB UNIT AVIC-D1/UC...

  • Page 34: Cc Unit (P/S)

    3.3 CC UNIT (P/S) CC UNIT (P/S) > > AVIC-D1/UC...
  • Page 35 No differentiation is made between chip capacitors and ← 0.022 R022 discrete capacitors. The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. 2SA1385-ZS1 AVIC-D1/UC...

  • Page 36: Cc Unit (Cpu, Asic, Sdram)(Guide Page)

    3.4 CC UNIT (CPU, ASIC, SDRAM)(GUIDE PAGE) Large size SCH diagram Guide page CC UNIT (CPU, ASIC, SDRAM) Detailed page AVIC-D1/UC...
  • Page 37 CN601 AVIC-D1/UC...
  • Page 38 AVIC-D1/UC...
  • Page 39 AVIC-D1/UC...
  • Page 40 AVIC-D1/UC...
  • Page 41 AVIC-D1/UC...

  • Page 42: Cc Unit (Graphic)(Guide Page)

    3.5 CC UNIT (GRAPHIC)(GUIDE PAGE) CC UNIT (GRAPHIC) AVIC-D1/UC...
  • Page 43 AVIC-D1/UC...
  • Page 44 AVIC-D1/UC...
  • Page 45 AVIC-D1/UC...
  • Page 46 AVIC-D1/UC...
  • Page 47 AVIC-D1/UC...

  • Page 48: Cc Unit (Rom, Sram, Bus-Buffer)

    3.6 CC UNIT (ROM, SRAM, BUS-BUFFER) AVIC-D1/UC...
  • Page 49 CC UNIT (ROM, SRAM, BUS-BUFFER) AVIC-D1/UC...

  • Page 50: Cc Unit (Main, Cc Core I/F)

    3.7 CC UNIT (MAIN, CC CORE I/F) AUDIO SIGNAL CC UNIT (MAIN, CC CORE I/F) AVIC-D1/UC...
  • Page 51 AVIC-D1/UC...

  • Page 52: Cc Unit (Gps, Sensor, Video, I/F)

    3.8 CC UNIT (GPS, SENSOR, VIDEO, I/F) CC UNIT (GPS, SENSOR, VIDEO, I/F) > CN5002 AVIC-D1/UC...
  • Page 53 CN461 COMPOSIT VIDEO SIGNAL RGB SIGNAL SYNC SIGNAL AUDIO SIGNAL CN1701 CN2804 AVIC-D1/UC...
  • Page 54 AVIC-D1/UC...
  • Page 55 AVIC-D1/UC...
  • Page 56 AVIC-D1/UC...
  • Page 57 AVIC-D1/UC...

  • Page 58: Gps Unit (Guide Page)

    3.9 GPS UNIT (GUIDE PAGE) GPS ANTENNA CN551 AVIC-D1/UC...
  • Page 59 GPS UNIT AVIC-D1/UC...
  • Page 60 AVIC-D1/UC...
  • Page 61 AVIC-D1/UC...
  • Page 62 AVIC-D1/UC...
  • Page 63 AVIC-D1/UC...

  • Page 64: Dvd Core Unit(Ms3R)(Guide Page)

    3.10 DVD CORE UNIT(MS3R)(GUIDE PAGE) sense M1 LOADING MOTOR CXC4659 AVIC-D1/UC...
  • Page 65 DVD CORE UNIT (MS3R) : The power supply is shown with the marked box. A B C AVIC-D1/UC...
  • Page 66 PICKUP UNIT(SERVICE) AVIC-D1/UC...
  • Page 67 M3 SPINDLE MOTOR CXM1308 CARRIAGE MOTOR CXC4314 AVIC-D1/UC...
  • Page 68 AVIC-D1/UC...
  • Page 69 AVIC-D1/UC...
  • Page 70 Interval FWD Interval REV VHALF→ VHALF→ VHALF→ 2 CH1: TD 2 CH1: TD 2 CH1: TD 0.5V/div.5ms/div. 0.5V/div.5ms/div. 0.5V/div.5ms/div. 3 CH2: COP-COM 3 CH2: COP-COM 3 CH2: COP-COM 2.0V/div.5ms/div. 2.0V/div.5ms/div. 2.0V/div.5ms/div. Traverse501FWD Traverse501REV Traverse5000FWD VHALF→ VHALF→ VHALF→ VHALF→ VHALF→ VHALF→ AVIC-D1/UC...
  • Page 71 0.5V/div.20ms/div. 0.5V/div. 100µs/div. 5 FD 0.5V/div. 1ms/div. → Play TD ID search Insaide Outside Focus close VHALF→ VHALF→ VHALF→ 5 FD 5 FD 5 FD 0.5V/div.500µs/div. 0.5V/div.500µs/div. 0.5V/div.20ms/div. Focus jamp → Focus jamp → Play TD VHALF→ VHALF→ VHALF→ AVIC-D1/UC...

  • Page 72: Compound Unit(A) And Compound Unit(B)

    3.11 COMPOUND UNIT(A) AND COMPOUND UNIT(B) COMPOUND UNIT(A) Q1299 R1298 R1299 CPT231SCTD S1205 CSN1070 CN1202 DISC SENS DISC SENS S1203 CSN1069 CSN1070 S1204 S1202 CSN1069 12cm S1201 CSN1069 COMPOUND UNIT(B) CLAMP AVIC-D1/UC...

  • Page 73: Pu Unit(Reference)

    3.12 PU UNIT(REFERENCE) Iop78 78LD Ishf Vshf : 4V Short round 78LD 65LD LDGND 65LD Iop65 Short round LDGND 65MD Top View VR2/ 65Rmd 65MDG Im/ 2 78MD Vmda VR1/ 78Rmd 78MDG CN1101 Im/ 2 Vref : 2.5V TEMP AVIC-D1/UC...

  • Page 74: Cd Mechanism Module(Guide Page)

    3.13 CD MECHANISM MODULE(GUIDE PAGE) PICKUP UNIT(P10)(SERVICE) M1 CXC4440 SPINDLE MOTOR M2 CXB8933 LOADING /CARRIAGE CD DRIVER MOTOR AVIC-D1/UC...
  • Page 75 S904:12EJ SWITCH.....ON-OFF S905:8EJ SWITCH....ON-OFF The underlined indicates the switch position. SIGNAL LINE FOCUS SERVO LINE TRACKING SERVO LINE CARRIAGE SERVO LINE SPINDLE SERVO LINE CD CORE UNIT(S10.1) 3.3V REGULATOR SRAMLEVEL2 MICRO COMPUTER 3V REGULATOR CN1301 SRAMLEVEL1 PE5454B SRAMLEVEL0 TYPE_A/D & AVIC-D1/UC...
  • Page 76 AVIC-D1/UC...
  • Page 77 AVIC-D1/UC...
  • Page 78 AVIC-D1/UC...
  • Page 79 AVIC-D1/UC...
  • Page 80 7 SIN 500mV/div 200mV/div 1V/div @ TE 500mV/div 9 TIN 500mV/div CD-ROM play operation(Regular track Jump) Spindle waveform during play operation Spindle waveform during play operation (Wider) Ref.: Ref.: Ref.: REFO REFO REFO Mode: Mode: Mode: Normal Normal Normal AVIC-D1/UC...
  • Page 81 500mV/div 4 LOEJ 3 12SNS 9 TIN 5V/div 5V/div 500mV/div 4 LOEJ 5V/div 12 cm CD Eject operation 8 cm CD Eject operation CD-DA >> CD-ROM mode change(Band key) Ref.: Ref.: Ref.: REFO Mode: Mode: Mode: Normal Normal Normal AVIC-D1/UC...
  • Page 82 % RFAGC 1V/div 500ms/div 1V/div 500µs/div 8 CIN 9 TIN 500mV/div 1V/div 9 TIN @ TE 500mV/div 1V/div 0 FIN 1V/div CD-ROM >> CD-DA mode change(Band key) Black dot(800µm) during play Ref.: Ref.: REFO REFO Mode: Mode: Normal Normal AVIC-D1/UC...
  • Page 83 AVIC-D1/UC...

  • Page 84: System Unit (Audio)

    3.14 SYSTEM UNIT (AUDIO) AVIC-D1/UC...
  • Page 85 AUDIO SIGNAL SYSTEM UNIT (AUDIO) AVIC-D1/UC...

  • Page 86: System Unit (Syscom, Video, I/F)(Guide Page)

    3.15 SYSTEM UNIT (SYSCOM, VIDEO, I/F)(GUIDE PAGE) SYSTEM CONTROLLER CN605 AVIC-D1/UC...
  • Page 87 CN901 SYSTEM UNIT (SYSCOM, VIDEO, I/F) COMPOSIT VIDEO SIGNAL AUDIO SIGNAL > > CN5901 EM CONTROLLER AVIC-D1/UC...
  • Page 88 AVIC-D1/UC...
  • Page 89 AVIC-D1/UC...
  • Page 90 AVIC-D1/UC...
  • Page 91 AVIC-D1/UC...

  • Page 92: System Unit (P/S)

    3.16 SYSTEM UNIT (P/S) > > > > > > CN801 AVIC-D1/UC...
  • Page 93 FAN MOTOR AUDIO SIGNAL CXM1320 SYSTEM UNIT (P/S) > > > AVIC-D1/UC...

  • Page 94: Monitor Pcb (Guide Page)

    3.17 MONITOR PCB (GUIDE PAGE) POWER SUPPLY DIMMER TEMPERATURE SENSOR ⁄ ¤ : The power supply is shown with the marked box. Monitor Adjustment PCB(GGF1416) AVIC-D1/UC...
  • Page 95 MONI_PANEL UNIT Consists of MONITOR PCB KEYBOARD PCB MONITOR PCB PANEL PCB DIMMER P in P IC Multi Video Processing Separation P in P & Interface : RGB Signal : Sync Signal : Composite Video Signal AVIC-D1/UC...
  • Page 96 AVIC-D1/UC...
  • Page 97 CN701 AVIC-D1/UC...
  • Page 98 TOUCH PANEL LCD PANEL AVIC-D1/UC...
  • Page 99 LCD PANEL CN5700 AVIC-D1/UC...
  • Page 100 6 CH2 : IC5901 Pin 6 # CH2 : POL 0 CH4 : VG ! CH1 : CSYNC0 ^ CH3 : STH1 8 CH1 : ANG 0 CH3 : VG % CH2 : CX 0 CH4 : VG 9 CH2 : GOUT AVIC-D1/UC...
  • Page 101 0 CH4 : VG ) CH2 : PIPRES ¤ CH4 : PIPDA ! CH1 : CSYNC0 0 CH3 : VG * CH2 : CPH ( CH1 : V33 ⁄ CH3 : PIPCK ) CH2 : PIPRES ¤ CH4 : PIPDA AVIC-D1/UC...

  • Page 102: Keyboard Pcb

    3.18 KEYBOARD PCB MONI_PANEL UNIT Consists of MONITOR PCB KEYBOARD PCB PANEL PCB KEYBOARD PCB CN5008 SELECT P. AD AVIC-D1/UC...
  • Page 103 P. ADJ AVIC-D1/UC...

  • Page 104: Panel Pcb

    3.19 PANEL PCB PANEL PCB CN1651 CD EJECT DVD EJECT MONI_PANEL UNIT Consists of MONITOR PCB KEYBOARD PCB PANEL PCB AVIC-D1/UC...
  • Page 105 AVIC-D1/UC...

  • Page 106: Connector Unit

    3.20 CONNECTOR UNIT CN702 AVIC-D1/UC...
  • Page 107 CONNECTOR UNIT > AVIC-D1/UC...

  • Page 108: Main Pcb Unit

    3.21 MAIN PCB UNIT CN2806 MAIN PCB UNIT > HZU6R2(B2) CZC5169 CZX5102 (FLAP) AVIC-D1/UC...
  • Page 109 4 CH4 : MOT1 • HALF OPEN • ANGLE 5 CH1 : HALFSW 3 CH3 : MOT0 7 CH1 : PULSE0 3 CH3 : MOT0 2 CH2 : PULSE1 4 CH4 : MOT1 2 CH2 : PULSE1 4 CH4 : MOT1 AVIC-D1/UC...

  • Page 110: Pcb Connection Diagram

    For further information for respective destinations, be sure to check with the schematic dia- gram. 2.Viewpoint of PCB diagrams Capacitor Connector SIDE A SIDE B P.C.Board Chip Part CN461 CN601 CN5002 CN1701 AVIC-D1/UC...
  • Page 111 SIDE A CN1802 EXTERNAL IN/OUT CN2804 FRONT AVIC-D1/UC...
  • Page 112 CC UNIT AVIC-D1/UC...
  • Page 113 SIDE B AVIC-D1/UC...

  • Page 114: Gps Unit

    4.2 GPS UNIT GPS UNIT SIDE A ANTENNA ASSY CN551 AVIC-D1/UC...
  • Page 115 GPS UNIT SIDE B AVIC-D1/UC...

  • Page 116: Dvd Core Unit(Ms3R)

    4.3 DVD CORE UNIT(MS3R) DVD CORE UNIT (MS3R) GND1 AVIC-D1/UC...
  • Page 117 SIDE A RFOUT PICKUP UNIT (SERVICE) AVIC-D1/UC...
  • Page 118 DVD CORE UNIT (MS3R) AVIC-D1/UC...
  • Page 119 SIDE B AVIC-D1/UC...

  • Page 120: Compound Unit(A) And Compound Unit(B)

    4.4 COMPOUND UNIT(A) AND COMPOUND UNIT(B) COMPOUND UNIT(A) COMPOUND UNIT(B) Q1299 R1298 CLAMP R1299 S1205 S1204 DISC SENS S1203 DISC SENS S1202 12cm S1201 CN1202 AVIC-D1/UC...
  • Page 121 AVIC-D1/UC...

  • Page 122: Cd Core Unit(S10.1)

    4.5 CD CORE UNIT(S10.1) CD CORE UNIT(S10.1) SIDE A LOADING /CARRIAGE MOTOR SPINDLE MOTOR CN1301 HOME REFO1 AVIC-D1/UC...
  • Page 123 CD CORE UNIT(S10.1) SIDE B 12EJ DSCSNS AVIC-D1/UC...

  • Page 124: System Unit

    4.6 SYSTEM UNIT SYSTEM UNIT AV IN/OUT POWER SUPPLY CN5901 FRONT AVIC-D1/UC...
  • Page 125 SIDE A CN901 WIRED REMOTE CONTROLLER FM/AM ANTENNA FAN MOTOR FRONT AVIC-D1/UC...
  • Page 126 SYSTEM UNIT CN801 AVIC-D1/UC...
  • Page 127 SIDE B CN605 AVIC-D1/UC...

  • Page 128: Monitor Pcb

    4.7 MONITOR PCB MONITOR PCB TOUCH PANEL LCD PANEL FRONT AVIC-D1/UC...
  • Page 129 SIDE A CN5700 LCD PANEL CN701 FRONT AVIC-D1/UC...
  • Page 130 MONITOR PCB AVIC-D1/UC...
  • Page 131 SIDE B AVIC-D1/UC...

  • Page 132: Keyboard Pcb

    4.8 KEYBOARD PCB KEYBOARD PCB SIDE A OPEN ANGLE DEST INFO TRFC P.ADJ MEMO RESET SELECT VOL+ VOL- AVIC-D1/UC...
  • Page 133 KEYBOARD PCB SIDE B CN5008 AVIC-D1/UC...

  • Page 134: Panel Pcb

    4.9 PANEL PCB SIDE B PANEL PCB SIDE A PANEL PCB CN1651 CD EJECT DVD EJECT AVIC-D1/UC...
  • Page 135 AVIC-D1/UC...

  • Page 136: Connector Unit

    4.10 CONNECTOR UNIT CONNECTOR UNIT SIDE A IP-BUS IN CN702 AV-BUS IN AVIC-D1/UC...
  • Page 137 CONNECTOR UNIT SIDE B AVIC-D1/UC...

  • Page 138: Main Pcb Unit

    4.11 MAIN PCB UNIT MAIN PCB UNIT IC,Q CN2806 (FLAP) OPEN HOME HALF AVIC-D1/UC...
  • Page 139 MAIN PCB UNIT IC,Q AVIC-D1/UC...

  • Page 140: Electrical Parts List

    IC 753 (A,43,110) IC TC7SH08FUS1 D 654 (B,148,136) Diode UDZS20(B) D 655 (B,148,140) Diode UDZS20(B) IC 801 (B,91,94) IC BA25BC0WFP D 656 (B,152,136) Diode UDZS20(B) IC 802 (B,102,91) IC S-818A33AUC-BGN D 657 (B,152,140) Diode UDZS20(B) IC 803 (B,59,32) IC TPS5103IDB AVIC-D1/UC...
  • Page 141 L 606 (A,112,88) Inductor CTF1378 L 756 (A,40,109) Inductor CTF1357 L 607 (A,110,88) Inductor CTF1378 L 801 (A,134,90) Inductor CTF1463 L 608 (A,109,88) Inductor CTF1378 L 802 (B,106,89) Inductor CTF1463 L 609 (A,105,88) Inductor CTF1378 L 803 (A,68,91) Inductor CTF1306 AVIC-D1/UC...
  • Page 142 R 45 (B,126,64) RS1/16S104J R 159 (B,126,65) RS1/16S473J R 46 (B,126,69) RS1/16S104J R 160 (A,119,69) RS1/16S473J R 47 (B,156,55) RS1/16S104J R 161 (A,105,77) RS1/16S473J R 48 (B,155,73) RS1/16S104J R 162 (B,131,65) RS1/16S473J R 49 (B,156,73) RS1/16S104J R 163 (A,122,66) RS1/16S560J AVIC-D1/UC...
  • Page 143 R 328 (A,105,67) RS1/16S101J R 616 (A,129,90) RS1/16SS101J R 329 (A,110,62) RS1/16SS821J R 617 (A,30,17) RS1/16S101J R 330 (A,110,58) RS1/16SS221J R 618 (A,33,24) RS1/16SS101J R 331 (A,110,60) RS1/16SS221J R 620 (A,50,18) RS1/16SS0R0J R 332 (A,110,59) RS1/16SS472J R 622 (A,50,15) RS1/16SS0R0J AVIC-D1/UC...
  • Page 144 RS1/10S102J (A,152,58) CKSRYB104K16 R 810 (B,62,38) RS1/16S101J (A,152,61) CKSRYB104K16 R 811 (B,62,37) RS1/16S1600D C 10 (A,152,64) CKSRYB104K16 R 812 (B,65,37) RS1/16S5601D C 11 (A,152,69) CKSRYB104K16 R 813 (B,67,38) RS1/16S1001D C 12 (B,131,26) 10É F CCG1192 R 814 (B,66,35) RS1/16S331J AVIC-D1/UC...
  • Page 145 C 79 (B,158,38) CKSRYB103K50 C 234 (A,83,29) CKSRYB104K16 C 80 (B,151,26) CKSRYB103K50 C 235 (A,84,27) CKSRYB104K16 C 81 (B,143,48) CKSRYB224K10 C 237 (A,118,24) CKSRYB104K16 C 82 (B,158,31) CKSRYB103K50 C 238 (A,119,22) CKSRYB104K16 C 96 (B,160,31) CKSRYB224K10 C 239 (A,84,26) CKSRYB104K16 AVIC-D1/UC...
  • Page 146 C 602 (A,118,115) CKSSYF104Z16 C 817 (B,103,95) CKSRYF104Z25 C 603 (A,120,115) CKSSYF104Z16 C 818 (B,65,38) CKSRYB473K50 C 604 (A,119,117) CKSSYB104K10 C 819 (B,66,33) CCSRCH101J50 C 605 (A,127,95) CCSRCH101J50 C 820 (B,69,34) CKSRYB224K16 C 606 (A,112,96) CCSRCH471J50 C 821 (B,65,40) CKSRYB103K50 AVIC-D1/UC...
  • Page 147 (A,23,26) RS1/16SS100J C 898 (A,150,107) CEVW101M16 R 406 (B,27,29) RS1/16S271J C 899 (A,158,107) CEVW101M16 R 407 (B,25,18) RS1/16S2R2J R 441 (A,30,27) RN1/16SC10R0D R 442 (B,32,24) RN1/16SE1501D R 443 (B,31,24) RN1/16SE2402D Unit Number:CWX3141 Unit Name:GPS Unit R 444 (B,31,27) RN1/16SE3302D AVIC-D1/UC...
  • Page 148 C 409 (A,21,29) CSZS100M6R3 C 410 (B,27,32) CKSSYB103K16 Unit Number:CWM9918 C 411 (A,21,27) CKSSYB102K50 C 412 (A,21,28) CKSSYB102K50 Unit Name:System Unit C 413 (A,20,31) CKSSYB104K10 C 414 (A,23,32) CKSSYB104K10 MISCELLANEOUS C 415 (A,24,30) CKSSYB104K10 IC 1001 (B,13,55) IC NJM2137V AVIC-D1/UC...
  • Page 149 Q 1960 (A,59,42) Transistor 2SA1576 D 1900 (A,124,82) Diode HZU8R2(B1) Q 4201 (A,85,90) Transistor 2SC4081 D 1901 (A,122,79) Diode 1SS355 Q 4202 (A,78,94) Transistor UMD2N D 1921 (A,155,9) Diode HZU8R2(B2) Q 4203 (B,17,93) Transistor DTC323TU D 1940 (B,146,47) Diode HZU11(B2) AVIC-D1/UC...
  • Page 150 R 1024 (B,10,70) RS1/16SS101J L 1702 (B,23,23) Inductor CTF1463 R 1025 (B,11,73) RS1/16S4701D L 1703 (B,31,18) Ferrite Bead CTF1528 R 1026 (B,14,72) RS1/16S4701D L 1704 (A,42,6) Ferrite Bead CTF1528 R 1027 (B,15,70) RS1/16SS102J L 1705 (A,40,7) Ferrite Bead CTF1528 AVIC-D1/UC...
  • Page 151 R 1535 (A,70,30) RAB4C681J R 1810 (A,36,90) RS1/8S471J R 1536 (B,97,27) RS1/16SS473J R 1811 (A,41,86) RS1/8S471J R 1537 (A,97,27) RS1/16SS681J R 1820 (A,62,39) RS1/16SS473J R 1538 (A,97,28) RS1/16SS473J R 1821 (A,64,29) RS1/16SS102J R 1539 (A,98,31) RAB4C681J R 1823 (A,66,27) RS1/16SS472J AVIC-D1/UC...
  • Page 152 R 1927 (B,142,19) RS1/10S0R0J R 4218 (B,13,92) RS1/16SS471J R 1930 (B,137,26) RS1/16SS471J R 4219 (B,16,83) RS1/16SS223J R 1931 (B,135,26) RS1/16SS471J R 4220 (B,16,89) RS1/16SS223J R 1932 (A,160,12) RS1/16SS223J R 4221 (B,12,81) RS1/16SS223J R 1933 (A,162,12) RS1/16SS183J R 4222 (B,17,83) RS1/16SS471J AVIC-D1/UC...
  • Page 153 C 1019 (A,16,57) CEVW100M16 C 1606 (B,61,22) CKSRYB102K50 C 1020 (A,33,73) CEVW100M16 C 1608 (B,61,23) CKSRYB104K16 C 1021 (A,12,63) CEVW100M16 C 1651 (A,53,19) CKSRYB103K50 C 1022 (B,15,59) CKSRYB104K16 C 1652 (A,50,19) CKSRYB103K50 C 1023 (A,30,72) CKSRYB104K16 C 1653 (A,47,13) CKSRYB104K25 AVIC-D1/UC...
  • Page 154 C 1923 (A,170,9) CKSRYB102K50 C 4209 (A,75,99) CKSRYB105K10 C 1924 (A,135,8) CEVW100M16 C 4210 (A,67,97) CKSRYB105K10 C 1925 (A,157,10) CKSRYB473K50 C 4211 (A,74,100) CKSRYB105K10 C 1926 (A,137,25) CEVW221M10 C 4212 (A,76,96) CKSRYB105K10 C 1940 (B,141,56) CKSRYB104K16 C 4213 (A,78,98) CKSRYB105K10 AVIC-D1/UC...
  • Page 155 (A,79,69) Diode UDZS5R6(B) D 5336 (A,57,78) Diode UDZS6R2(B) Unit Number:CWM9920 D 5337 (A,62,83) Diode RB751V40 Unit Name:MONI_PANEL Unit D 5338 (A,57,83) Diode UDZS5R6(B) D 5371 (A,63,67) Diode UDZS8R2(B) D 5601 (A,108,40) Diode RB500V-40 MISCELLANEOUS D 5611 (A,120,53) Diode UDZS5R6(B) AVIC-D1/UC...
  • Page 156 (A,43,42) Inductor LCKBW1R0M2520 R 5022 (A,20,67) RS1/16S101J L 5075 (A,52,42) Inductor LCKBW100K2520 R 5024 (A,14,60) RS1/16S333J L 5078 (A,50,46) Inductor LCKAW100J2520 R 5025 (A,16,39) RS1/16S101J L 5079 (A,46,49) Inductor CTF1306 R 5026 (A,30,36) RS1/16S0R0J L 5101 (A,130,5) Inductor LCKAW100J2520 AVIC-D1/UC...
  • Page 157 R 5193 (A,38,13) RS1/16S0R0J R 5652 (A,79,53) RS1/16S471J R 5194 (A,39,18) RS1/16S0R0J R 5655 (A,80,59) RS1/16S473J R 5331 (A,57,72) RS1/16S105J R 5657 (A,94,37) RS1/16S0R0J R 5332 (A,71,73) RS1/16S473J R 5659 (A,79,58) RS1/16S222J R 5333 (A,78,72) RS1/16S183J R 5681 (A,9,26) RS1/16S104J AVIC-D1/UC...
  • Page 158 C 5005 (A,32,37) CKSSYF104Z16 R 5752 (A,72,167) RS1/16SS681J R 5753 (A,52,12) RS1/16SS681J C 5006 (A,34,38) CKSSYF104Z16 R 5802 (A,17,22) RS1/16S0R0J C 5007 (A,36,38) CKSSYF104Z16 R 5803 (A,35,21) RS1/16S333J C 5008 (A,39,37) CKSSYF104Z16 R 5802 (A,17,22) RS1/16S0R0J C 5009 (A,40,38) CKSSYF104Z16 AVIC-D1/UC...
  • Page 159 C 5105 (A,50,53) CSZS100M10 C 5618 (A,115,50) CKSRYB222K50 C 5151 (A,63,33) CSZSR220M16 C 5619 (A,122,53) CKSRYB223K50 C 5152 (A,48,32) CKSRYB103K50 C 5621 (A,13,27) CCSRCH102J50 C 5153 (A,47,35) CCSRCH4R0C50 C 5622 (A,13,26) CCSRCH102J50 C 5154 (A,47,30) CCSRCH4R0C50 C 5623 (A,9,20) CCSRCH102J50 AVIC-D1/UC...
  • Page 160 C 5869 (A,108,17) CKSRYB472K50 R 2803 (A,31,22) RS1/16S0R0J R 2804 (A,33,22) RS1/16S102J C 5870 (A,108,19) CKSRYB472K50 R 2811 (A,38,24) RS1/10S0R0J C 5873 (A,112,30) CKSSYF104Z16 C 5875 (A,102,19) CKSRYB104K50 R 2812 (A,38,21) RS1/10S0R0J C 5876 (A,102,17) CKSQYF105Z25 R 2813 (A,43,10) RS1/16S102J AVIC-D1/UC...
  • Page 161 CKSRYB104K50 R 603 (A,4,19) RS1/16SS820J R 604 (A,8,10) RS1/16SS820J C 14 CKSRYB104K50 R 605 (A,9,10) RS1/16SS820J R 606 (A,10,10) RS1/16SS220J Unit Number:CWX3178 R 607 (A,11,10) RS1/16SS103J R 608 (A,19,11) RS1/16SS101J Unit Name:DVD Core Unit (MS3R) R 612 (B,9,10) RAB4CQ820J AVIC-D1/UC...
  • Page 162 C 611 (A,15,13) CCSSCH181J25 R 1235 (B,14,10) RS1/16SS243J C 1101 (B,14,101) CSZSC470M16 C 1102 (A,25,100) CSZSR470M6R3 R 1236 (B,13,10) RS1/16SS683J R 1238 (A,50,64) RS1/16SS2R2J C 1103 (B,30,105) CKSSYB104K10 R 1239 (A,51,64) RS1/16SS2R2J C 1104 (B,33,102) CKSSYB103K16 R 1241 (A,15,11) RS1/16SS822J AVIC-D1/UC...
  • Page 163 X 201 CSS1603 (A,51,35) Ceramic Resonator 16.934MHz C 1331 (B,21,66) CCSSCH470J50 X 701 CSS1652 (A,59,53) Ceramic Resonator 4.00MHz C 1332 (A,20,72) CKSRYB224K10 S 901 (A,15,43) Switch(HOME) CSN1067 S 903 (B,53,100) Switch(DSCSNS) CSN1068 C 1333 (A,19,72) CKSRYB105K10 C 1334 (B,15,67) CKSRYB102K50 AVIC-D1/UC...
  • Page 164 R 750 (A,39,59) RS1/16SS473J C 703 (B,50,61) CKSSYB103K16 R 754 (B,48,60) RS1/16SS102J C 706 (B,50,62) CKSSYB104K10 R 755 (A,43,61) RS1/16SS102J R 765 (B,51,40) RAB4CQ221J C 707 (A,36,45) CKSSYB104K10 R 769 (B,48,40) RAB4CQ221J C 712 (A,22,42) CKSRYB224K16 C 714 (B,60,45) CKSSYB104K10 AVIC-D1/UC...
  • Page 165 CKSSYB103K16 C 910 (B,60,71) CKSQYB225K10 Miscellaneous Parts List Pickup Unit(Service) CXX1815 Motor Unit(LOADING) CXC4659 Motor Unit(CARRIAGE) CXC4314 Motor(SPINDLE) CXM1308 Pickup Unit(P10)(Service) CXX1641 Motor Unit(SPINDLE) CXC4440 CXB8933 Motor Unit(LOADING/CARRIAGE) M 10 Motor Unit(FLAP) CZX5102 LCD Panel CWX3229 Fan Motor CXM1320 AVIC-D1/UC...

  • Page 166: Adjustment

    Test Disc TCD-782 Checking the grating(CD) L.P.F. Checking the grating(Two pieces) Test Disc GGV1018 Checking the grating(DVD) *1) Since this product does not have OSD IC, OSD for adjustment is displayed by using GGF1416 at the time of monitor adjustment. AVIC-D1/UC...

  • Page 167: Dvd Adjustment

    • Laser didoes may be damaged, if the volume switch for surement device should be set to floating ground. Attention) • Test mode starting procedure Please select "MS3 check" to start test mode. • Test mode stopping procedure ACC and Backup OFF. AVIC-D1/UC...
  • Page 168 Layer L1:4X00 0000 Focus Gain Coefficient(Layer1) CD x 4CLV: Tracking Gain Coefficient(Layer0) 4X00 0000 Tracking Gain Coefficient(Layer1) Track number AS normalization adjustment feature specification specification (Layer0) AS normalization adjustment feature ID display Track (Layer1) number display Jump start Search Start AVIC-D1/UC...
  • Page 169 Please confirm the disc 0X9A AV chip error DVD is stopping because mechanism detected abnormality 0X9B RecaveryNG(BE) DVD is stopping because mechanism detected abnormality Play state error 0X9C 0X9D Disc data error 0X9E Serface error (Disc distinction is improper) AVIC-D1/UC...
  • Page 170 4. Pick up unit main shaft replacement 5. Pick up unit sub-shaft replacement Measurement device and tools : Oscilloscope Allen key wrench Screw lock (GYL1001) Disk used : GGV1018 Measurement reference : GND1 Measurement point : RFOUT Connection diagram DVD core unit RFOUT Oscilloscope GND1 AVIC-D1/UC...
  • Page 171 10. Adjust with a screw rock the shaft and skew adjustment screw to the same state as initial one. Skew adj. screw Skew adj. screw Apply glue Prevent applied glue Prevent applied glue Shaft from extending beyond this position. from extending beyond this position. AVIC-D1/UC...

  • Page 172: Cd Adjustment

    1k ohms in series. • The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it. AVIC-D1/UC...
  • Page 173 → → TYP(1X) TYP(2X) TRK 22 MIN 22 SEC 22 TRK 11 MIN 11 SEC 11 TRK 11 MIN 11 SEC 11 TRK 22 MIN 22 SEC 22 As for the double speed (2x), audio output cannot be supported AVIC-D1/UC...

  • Page 174: Checking The Grating After Changing The Pickup Unit

    Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. • Hint Reloading the disc changes the clamp position and may decrease the "wobble". AVIC-D1/UC...
  • Page 175 Ech → Xch 20mV/div, AC Grating waveform Fch → Ych 20mV/div, AC 0° 30° 45° 60° 75° 90° AVIC-D1/UC...

  • Page 176: Error Mode

    If TOC can’t be read, error wouldn’t occur, but mechanism still continues its operation. The upper digits of error code is mainly classified by 3 kinds as follows: 1x: Setup related error, 3x: Search related error, Ax: Other errors. AVIC-D1/UC...

  • Page 177: Monitor Pcb Adjustment

    6.6 MONITOR PCB ADJUSTMENT - Adjustment point MONITOR PCB(SIDE A) CN5009 VR5331 T5331 CN5331 IC5601 CN5008 IC5001 CN5007 CN5002 CN5801 MONITOR PCB(SIDE B) DIMDTY FLW2 GNDFL EPRTEST FLP2 INVBST INVPUL CSYNCO V5 VM12 NVSYNC VB VG VCOM AVIC-D1/UC...
  • Page 178 AVIC-D1/UC...
  • Page 179 AVIC-D1/UC...
  • Page 180 AVIC-D1/UC...
  • Page 181 AVIC-D1/UC...
  • Page 182 Clock phase adjustment initial value Don't care 1F-3F Don't care External light of dimmer adjustment(H) Back light of dimmer adjustment(H) External light of dimmer adjustment(M) Back light of dimmer adjustment(M) External light of dimmer adjustment(L) Back light of dimmer adjustment(L) Don't care 43-7F AVIC-D1/UC...
  • Page 183 The settings (or written data) will change when some adjustments are made in each mode. * The following examples show the maximum values. (1) Flicker adjustment mode Settings or Adjustment Adjustment item Adjustable name written data written data range (DEC) Common reverse output center [0 - 255] COM DC AVIC-D1/UC...
  • Page 184 (IC4001 : TC90A64AF-P). (Before displayed on the screen, the setting value is converted via some software.) Displayed value E2PROM written value. 2-screen IC register (adjusting value) (DEC) (DEC) setting (BIN) 0111 (MAX) 0110 0001 0000 (TIP) 1111 1001 1000 (MIN) AVIC-D1/UC...
  • Page 185 (DEC) Clock phase adjustment [0 - 15] DOT CLK Clock phase adjustment (initial) [0 - 15] [FACTORY Common reverse output center [0-255] COM DC [0-255] [FACTORY Common reverse output center adjustment (initial) * CS(Check Sum)display is not performed. AVIC-D1/UC...

  • Page 186: Test Mode

    A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Password Right. Go to next page. • Password NG : Nothing will be displayed, and reboot action will be taken. AVIC-D1/UC...
  • Page 187 Learned data inside gyro sensor is cleared. INFO data clear sensor is clear When the job is done, the screen will return to “menu”. Port status Port status display Port status is displayed. (reverse, parking, information pulse, SDRAM capacity.) AVIC-D1/UC...
  • Page 188 SRAM is copied to SRAM from PC card. Program forced Program forced write Rewriting of SYS (system), GPS (GPS) and APL write (application) software are done by force. (Joystick is used) The system will return to “menu” by BACK key. AVIC-D1/UC...
  • Page 189 Pages can be changed by [ ] and [ ] keys. 4. Version information Version No. for BOOT section = X.XX System software does not exist in SDRAM. Version No. for BOOT section = X.XX Version No. for SDRAM = Y.YY AVIC-D1/UC...
  • Page 190 : X coordinate of the touch panel • minimum value received max_x(A,B) : X coordinate of the touch panel • maximum value received min_y(A,B) : Y coordinate of the touch panel • minimum value received max_y(A,B) : Y coordinate of the touch panel • maximum value received AVIC-D1/UC...
  • Page 191 • When pressing on the [+] cursor, make sure to press at the center of “+”. • The result of calibration will be recorded in the SRAM. • If effective operation is not made for 30 seconds, the system will recognize as “erroneous end” and stops the calibration. AVIC-D1/UC...
  • Page 192 In case the upper limit and the lower limit values and the 16 points calibration values are preset in the SRAM. “The initial value is substituted.” In case the value stored as the initial (default) value is preset in the SRAM. “Error Condition” In case the SRAM value is demolished or some unexpected situation is happening. AVIC-D1/UC...
  • Page 193 (0, 0) : Coordinate (X direction, Y direction) obtained by normalizing the AD data value of the pressed location within the effective range. (0, 0) : Coordinate (X direction, Y direction) obtained by adding the correction based on calibration to the normalized coordinate. AVIC-D1/UC...
  • Page 194 : X coordinate normalized (expanded) within the effective range. panel y_before : Y coordinate normalized (expanded) within the effective range. panel x_after : X coordinate obtained by adding the correction based on calibration. panel y_after : Y coordinate obtained by adding the correction based on calibration. AVIC-D1/UC...
  • Page 195 System Language of the system [**.**] System program file. UC050SYS.USA language program (FLASH) is displayed. [NG] System program does not exist. Application Language data file is displayed. [**.**] Language data file. UC050DAT.USA language [NG] Language data does not exist. AVIC-D1/UC...
  • Page 196 Error occurring program name. LINE Error occurring program line number VERS Error occurring program version number DATE Error occurring program creation date. TIME Error occurring program creation time. AUTH Error occurring program creator name. ERROR-TIME Error occurrence date and time. AVIC-D1/UC...
  • Page 197 TESTMODE MENU [SERVICE_MENU(TECHNICAL)] 1. Change to display error [Message] 2. Start within debug shell [On] 3. Program loading [Disc version] 4. GPS assessment 5. File maintenance 6. Program forced write <== back page ==> next page SYSTEM Ver. : [BOOT]0.65 [OS]0.65 AVIC-D1/UC...
  • Page 198 SYSTEM Ver. : [BOOT]0.65 [OS]0.65 Display when an error occurs: • If error information exists: ERROR INFORMATION ERCD f f f f f f f f(-1) FILE tsk_ini.c LINE 152(00000098) VERS 1.11 DATE 2003/04/03 TIME 04:59:10 AUTH ERROR-TIME ffff-ff-ff ff:ff:ff AVIC-D1/UC...
  • Page 199 Once this mechanism becomes inoperable, “reset request” will be sent to the power supply microprocessor when a preset time (approximately 4 seconds) has elapsed. In order to record operational situation of such an occasion, a special code which is not an error code is recorded in the ERCD. AVIC-D1/UC...
  • Page 200 02 / 05 / 10 :Ver. 3. 09 02 / 03 / 12 SENSOR :Ver. 5. 56 Press [BACK] to return FLASH Display of DRAGON FLASH ROM version information. Display of GPS version information. SENSOR Display of sensor version information. AVIC-D1/UC...
  • Page 201 (Depends on DISTANCE status.) DISTANCE status SPEED PULSE status Display Low vehicle speed pulse CHECK learning is under way. SPEED PULSE Low vehicle speed pulse is Low vehicle speed is NG. NG xx[km/h] Others - - - - - AVIC-D1/UC...
  • Page 202 (layer-1) FGA0 : Focus gain coefficient (layer-0) FGA1 : Focus gain coefficient (layer-1) TGA0 : Tracking gain coefficient (layer-0) TGA1 : Tracking gain coefficient (layer-1) ASAT0 : AS normalize adjustment value (layer-0) ASAT1 : AS normalize adjustment value (layer-1) AVIC-D1/UC...
  • Page 203 : Model name of the drive being used. Firm : Version number of the drive being used. [Direction + Enter] [1] Starts FE test mode. [2] Starts EDC-1 mode test. [3] Starts EDC-2 mode test. [Return] Returns to the test mode menu. AVIC-D1/UC...
  • Page 204 : See the Test Mode Flow Chart for the contents of adjusted values. [Direction + Enter] [1] Tracking balance [2] Carriage adjustment The carriage moves outward with [→] key and moves inward with [←] key. [Return] Returns to the main menu. AVIC-D1/UC...
  • Page 205 Display data : 00000000 = Layer 0 00000001 = Layer 1 [4] Track jump/ID search Toggle ON/OFF with [Enter] key. [5] Track opening Clears the adjusted value display and moves to the focus close status. [Return] Returns to the main menu. AVIC-D1/UC...
  • Page 206 : ID being tested [Direction + Enter] Select the layer and ID (address) of the jump destination with [Direction] key. Press [Enter] to execute the jump. Specify the address in "mmssff (minute: second: frame)" for CD-ROM. [Return] Returns to the main menu. AVIC-D1/UC...
  • Page 207 Disc change has been executed since the last command. X-3055 mode error ERR_ATAPI_MODE ffff100dH A command for test mode has been issued in Normal mode, or other way round. ERR_ATAPI_OFF ffff100eH ATAPI BIOS is OFF. ERR_ATAPI _TEST ffff100fH An error has occurred with ATAPI_TEST command. AVIC-D1/UC...
  • Page 208 0X02 ERR_ATAPI_NODISC 0X3A Not Ready 0X02 0X04 Not Ready ERR_ATAPI_DNR 0X06 0X29 Unit attention 0X02 0X30 Not Ready 0X03 0X02 ERR_ATAPI_DISC Medium Error 0X09 0X05 0X30 Illegal Request 0X64 0X03 ERR_ATAPI_DATA 0X11 Medium Error 0X06 ERR_ATAPI_DCHG 0X28 Unit attention AVIC-D1/UC...

  • Page 209: Using The Test Disc

    1. Select an inspection item by the [ ] and [ ] keys on the remote controller, and inspection screen will appear when the [CR] key is pressed. 2. When the [RETURN] key on the remote controller is pressed, the screen will go back to the menu screen. * Refer to the explanation of each screen for the details. AVIC-D1/UC...
  • Page 210 14. File Maintenance mode [CR KEY] The selected menu is started. Self Test Menu 15. Picture check 16. Device check(Design engineer only) 17. Memory all clear (for Service) 18. BackUp Memory clear [CR KEY] The selected menu is started. AVIC-D1/UC...
  • Page 211 Time out error for response to BIOS call. Communication error due to a hardware problem could be the cause. It is highly possible that the hardware on the DRAGON side is defective. Unknown error Error due to unknown reason. AVIC-D1/UC...
  • Page 212 • When [RETURN] key on the remote controller is pressed while the inspection result is being displayed on the screen, inspection will be performed once again. • Only in the case of OK, you can move on to the next inspection by the [ ] key on the remote controller. AVIC-D1/UC...
  • Page 213 [joy stick down] It progresses to the next inspection. • External input image (VTR input image) is displayed and voice is outputted. • You can move on to the next inspection by the [ ] key on the remote controller. AVIC-D1/UC...
  • Page 214 • Only when all the conditions are met, you can move on to the next inspection by the [ ] key on the remote controller. It should be noted, however, that you will not be able to move on to the next inspection if there is an error (background color is red) even if the conditions are met. AVIC-D1/UC...
  • Page 215 • After the inspection screen is displayed, the above process is executed by the [NAVI] key on the remote controller. • The result of the process is displayed. • Only when everything is OK, you can move on to the next inspection by the [ ] key on the remote controller. AVIC-D1/UC...
  • Page 216 • The screen can be switched by the [ ] and [ ] keys on the remote controller. • RGB is drawn in the pattern of R 100% R 50% G 100% G 50% B 100% B 50%. • Total of 6 screens will be displayed. AVIC-D1/UC...
  • Page 217 • Voice file (WAVE format) will be played back. • The voice selected by the [CR] key on the remote controller will be played back. • Volume level can be changed by the [ ] and [ ] keys on the remote controller. AVIC-D1/UC...
  • Page 218 7. Window 8. Mono scope 9. Cycle line 1 10. Cycle line 2 11. Horizontal stripe 1 12. Horizontal stripe 2 13. Chinese character pattern 14. Map (map.jpg) 15. Natural image (nature.jpg) 16. Portrait 1 (hito1.jpg) 17. Portrait 2 (hito2.jpg) AVIC-D1/UC...
  • Page 219 • If SRAM clear is not successful, FLASH will not be cleared. • After the inspection screen is displayed, the above process is executed by the [NAVI] key on the remote controller. • The result of the process is displayed. AVIC-D1/UC...
  • Page 220 [return] It returns to a menu screen. • Back up variables are initialized by the [NAVI] key on the remote controller for system reset. • The screen will return to the menu screen by the [RETURN] key on the remote controller. AVIC-D1/UC...

  • Page 221: General Information

    (Fig.1) in the direction of the arrow, and move the Grille Assy to OPEN position. Note) Though the gear is heavy, please turn carefully not to inflict too much force. Turning with excessive force may cause damage in the rack or gear in the driving section. FRONT Fig.1 AVIC-D1/UC...
  • Page 222 Take much not to pull the connector forcedly or break it o because it is easy to be damaged. And also, u precision screwdriver in the same way in the installation. (Fig.3) Fig.3 AVIC-D1/UC...
  • Page 223 Remove the five screws. Disconnect the connector and then remove the Monitor PCB. Monitor PCB Fig.5 Removing the CD Mechanism Module (Fig.6) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. CD Mechanism Module Fig.6 AVIC-D1/UC...
  • Page 224 Removing the Heat Sink (Fig.8) Remove the two screws. Remove the seven screws and then remove the Heat Sink. Heat Sink Fig.8 Removing the System Unit (Fig.9) Remove the six screws. Disconnect the connector and then remove the System Unit. System Unit Fig.9 AVIC-D1/UC...
  • Page 225 Removing the Chassis Unit (Fig.10) Remove the three screws and then remove the Chassis Unit. Chassis Unit Fig.10 Removing the DVD Mechanism Module (Fig.11) Remove the four screws and then remove the DVD Mechanism Module. DVD Mechanism Module Fig.11 AVIC-D1/UC...
  • Page 226 Disconnect the connector and then remove the Connector Unit. Removing the Main PCB Unit (Fig.13) Straighten the two tabs at locations indicated. Remove the screw. Disconnect the connector and then remove the Main PCB Unit. Main PCB Unit Connector Unit Fig.13 AVIC-D1/UC...
  • Page 227 B to remove it. Be careful not to damage the flexible cable C. 7. Disconnect the 8/12 detection flexible-cable from the connector. Short here. Module pc board Connector (for pickup flexible cable) Connector (for 8/12 detection flexible cable) Load motor leads and clamp SW leads Connector (for CRG flexible cable) AVIC-D1/UC...
  • Page 228 Do not reuse the old skew screw. Be sure to use a brand-new skew screw supplied with a new pickup unit. Fix the skew screw with glue (GYL1001) after adjustment. Skew screw (main) Skew screw Pickup unit Sub shaft Skew screw AVIC-D1/UC...
  • Page 229 Caution: Before installing the carriage mechanism in the frames, be sure to apply some alcohol to the dampers and set the mechanism to the clamp mode. Carriage Mechanism Damper Lower Frame Damper Damper AVIC-D1/UC...
  • Page 230 Caution: In assembling, move the planet gear to the load/eject position before setting the feed screw in the inner holder. Washer Pickup Lock Arm Change Arm Styling Holder Feed Screw Inner Holder Planet Gear AVIC-D1/UC...

  • Page 231: Pcb Locations

    7.1.2 PCB LOCATIONS GPS UNIT SYSTEM UNIT MONITOR KEYBOARD CONNECTOR MAIN PCB UNIT UNIT CC UNIT PANEL PCB DVD CORE UNIT(MS3R) COMPOUND UNIT(A) COMPOUND UNIT(B) CD CORE UNIT(S10.1) AVIC-D1/UC...

  • Page 232: Connector Function Description

    3. IPGND 8. ASEN 3. NC 10. REMOUT 5. EXTOC 10. GND 4. MUTE 9. Rch 4. IP-SEL1 11. NEW AV SENS 5. BUS- 10. GND 5. IP-SEL2 12. AV ON 11. GND 6. LED-V 13. BEEP+ 7. GND AVIC-D1/UC...
  • Page 233 VSSQ : Data output GND NC : Not used NC : Not used LDQM LDQM UDQM UDQM A10/AP A10/AP IC's marked by * are MOS type. Be careful in handling them because they are very liable to be damaged by electrostatic induction. AVIC-D1/UC...
  • Page 234 LLDQM : Lower Lower DQ Mask Enable luben : Lower Upper Byte Enable LUDQM : Lower Upper DQ Mask Enable mrd : Memory Read mwr : Memory Write Strobe * TC74LCX08FTS1 * TC7SH04FUS1 1 NC 5 VCC 2 IN A 3 GND 4 OUT Y AVIC-D1/UC...
  • Page 235 * PD6336C - Pin Arrangement Chart AVIC-D1/UC...
  • Page 236 DMA CHANNEL WAIT DMARQ1 SELECT SECTION DMARQ2 WTxx WAIT CONTROL XREADY SECTION PC-CARD BLOCK INTP0 INTERRUPT INTP1 INTxx CONTROL INTP2 SECTION INTP3 SOUND BLOCK SRAM_CSSEL XCS_SRAM PROTECT XCS_SRAMH CHIP SELECT XCS_FLASH GENERATOR XCS_DSP SECTION USB BLOCK XWR_SRAM TIMER SECTION AVIC-D1/UC...
  • Page 237 20 VCC 1 DIR 19 oe 2 A1 18 B1 3 A2 17 B2 4 A3 16 B3 5 A4 15 B4 6 A5 7 A6 14 B5 13 B6 8 A7 12 B7 9 A8 11 B8 10 GND AVIC-D1/UC...
  • Page 238 3 GND 4 OUT Y UPD4721GSS1 AK4351VT DIF0 DIF1 MCLK DIF0 DIF1 LRCK De-emphasis Clock Divider Control VCOM BICK LRCK Serial Input SDATA VREF BICK Interface SDATA ∆Σ VCOM AOUTL Interpolator Modulator MCLK AOUTL ∆Σ AOUTR Interpolator Modulator AOUTR VREF AVIC-D1/UC...
  • Page 239 External Video Host Interface Controller Interface A2-24 DRGB Display Controller ARGB Memory Interface Controller 2D/3D Set-up Rendering Engine Engine 64bit Embedded SDRAM (64bit x 256K word) * TC7SH14FUS1 1 NC 5 VCC 2 IN A 3 GND 4 OUT Y AVIC-D1/UC...
  • Page 240 GND (2ndIF-AMP) VCC (RF-MIX) 2ndIFin1 RF-MIXin GND (RF-MIX) 2ndIFin2 VCC (1stLO-OSC) 2ndIFbypass 1stLO-OSC1 VCC (2ndIF-AMP) 1stLO-OSC2 2ndIFout GND (1stLO-OSC) REFout VCC (phase detector) VCC (reference block) PD-Vout3 REFin PD-Vout2 GND (divider block) PD-Vout1 LOout GND (phase detector) VCC (divider block) AVIC-D1/UC...
  • Page 241 Lower data write strobe input / output 87 RDB Read data strobe input / output 88 CS2B Chip select aria 1 for external storage input / output CS0B Chip select aria 0 for ROM input / output VCC6 Power supply (3.3V) AVIC-D1/UC...
  • Page 242 SIO3 Reception data input / output 140 BOWWOWB Watch dog timer output 141 IFDIR IF direct input / IF inverter amp output 142 IFVCC Power supply (3.3V) 143 IF IF input IFGND IF amp GND input * PD3390A Format Meaning CMOS AVIC-D1/UC...
  • Page 243 ERASE N.C. 35 DQ3 CIRCUIT CIRCUIT RY/BY 34 DQ10 N.C. 16 33 DQ2 32 DQ9 31 DQ1 CHIP ENABLE WRITE/ERASE RY/BY OUTPUT ENABLE PULSE TIMER BUFFER CIRCUIT 30 DQ8 29 DQ0 28 OE 27 V 26 CE 25 A0 AVIC-D1/UC...
  • Page 244 Remote control data input VDDSENS Power supply sense input ROT0 Rotary encoder input0 ROT1 Rotary encoder input1 LCDLR Not used TVIND Not used VSS0 VDD1 Power supply Crystal oscillator connection pin Crystal oscillator connection pin Not used Not used AVIC-D1/UC...
  • Page 245 I=3uA NDR_B CTIMR NDRV_B I=6uA Protection PDR_A PDRV_A hys. Soft COMP Start POFF ACTIVE hys. "HIGH" COMP POFF Reference VDDA PGND sub. GNDA Burst- OPLAMP Mode 2.50V Control Phase-Shift V2500 Controller Ignition LPWM PDR_C PDRV_C 1.25V NDR_D COMP NDRV_D AVIC-D1/UC...
  • Page 246 S-29221BR0I-J8T1 protect Memory Address Aray Decoder Data Resistor Output Buffer Mode Decode Logic Clock Pulse Voltage Ditector Counter Write Protect Circuit Clock Oscillater TPS850 Current BD6171KV - Pin Arrangement Chart AVIC-D1/UC...
  • Page 247 0.6V VO1DET SOFT INVERT START ERROR AMP PVCC2 DRIVER LATCH OUT2 INV2 RESET VREGA OCPC2 0.6V VO2DET SYNC UVLO DELAY OSCILLATOR PVCC5 PVCC4 OUT5 OUT4 5VREG DVCC VREGA VREGA VREF 0.6V 0.6V PGND5 PGND4 SGND DGND VO5DET VREGA VO4DET AVIC-D1/UC...
  • Page 248 Navigation control IRQPW output SYSRST Navigation control RSTOUT output BVDD Power supply BVSS ANTPW Auto antenna control output ILMPW Illumination power supply switch output FLAPILM Panel illumination switch output MEMOLED MEMO button LED control output dalmon Consumption current reduction output AVIC-D1/UC...
  • Page 249 Tuner : PLL chip enable output tunce@ Tuner : EEPROM chip enable output TUNPDI Tuner : Data input (SIO) TUNPDO Tuner : Data output (SIO) TUNCK Tuner : Data clock output (SIO) CTOS Navigation microcomputer data input (UART) * PE5478A AVIC-D1/UC...
  • Page 250 * TC74VHCT08AFTS1 NJM2561F1 75Ω DRIVER CLAMP Vsag Power Vout Save TA2050FS1 AVIC-D1/UC...
  • Page 251 Output pin for preamplifier for thread OPINLSL Input pin for preamplifier for thread OPOUT3 CH3 preamplifier output pin OPIN3(-) Input pin for inverting input for CH3 preamplifier OPIN3(+) Input pin for non-inverting input for CH3 preamplifier PREVCC PreVcc BA5835FP NJM2885DL1-33 Thermal Protection Bandgap Reference AVIC-D1/UC...
  • Page 252 CD mute control output 56-58 Not used CD LSI chip selection output Not used xwait CD LSI write control signal input CLKOUT Internal system clock output(Open) LOCK Spindle lock input Not used xwrite CD LSI write control signal output Not used AVIC-D1/UC...
  • Page 253 Flap closing sense input TYPE_A/D CD-DA analog/digital output change setup testin Chip check test program starting input HOME Home SW sense input TEMP Temperature information sense input VDSENS VD power supply short sense input Not used * PE5454B Format Meaning CMOS AVIC-D1/UC...
  • Page 254 Output of DRAM ras cas)(LDQM) Output of DRAM lower cas(LDQM) cas!(UDQM) Output of DRAM upper cas(UDQM) Output of DRAM we oe(cas) Output of DRAM oe(cas) D.GND Ground for digital circuits 73-88 RDB0-15 Input/output of DRAM data0-15 89-99 RA0-10 Output of DRAM address0-10 AVIC-D1/UC...
  • Page 255 Connected to the capacitor for output of REFOUT Reversal input of FE Output of FE ADIN Input of FE, TE A/D converter Reversal input of TE Output of TE Output of LD Input of PD D.GND Ground for digital circuits * UPD63763GJ AVIC-D1/UC...
  • Page 256 UBEN(P91) LBEN/WRL(P90) CSI0/IIC WAIT General SCK0 A1-A2(P100-P107,P110-P113) Register SO1/TXD0 (32bit x 32) A13-A15(P34-P36) SI1/RXD0 CSI1/UART0 A16-A21(P60-P65) SCK1/ASCK0 AD0-AD15 (P40-P47,P50-P57) CSI2 SCK2 TXD1 RXD1 UART1 ASCK1 DMAC : 3ch CLKOUT Port Timer for clock Converter XT1(P114) RESET Watch dog timer AVIC-D1/UC...
  • Page 257 22 AUDIOGND audio ground Ground of audio block 23 L ch O L channel output FM stereo “L-ch” signal output or AM audio output 24 R ch O R channel output FM stereo “R-ch” signal output or AM audio output AVIC-D1/UC...

  • Page 258: Explanation

    It slides down to angle 12 when OPEN/CLOSE key is pressed quickly at the closed or angle adjustment position. CD insertion/EJECT operation is possible from this position. At the half open position, LAST position is restored when OPEN/CLOSE key is pressed quickly. Approx. 62.5° AVIC-D1/UC...
  • Page 259 If operation becomes impossible in the angle of 45° or smaller, it opens to this position so that the obstruction (assuming a finger getting caught) can be released completely. AVIC-D1/UC...
  • Page 260 • It shifts to the open direction by 1 angle if the angle at which operation was disabled was 45° or larger. b. During OPEN operation • It shifts to the close direction by 1 angle from the angle at which operation was disabled. AVIC-D1/UC...
  • Page 261 SENS ANGLE 0 (FULL CLOSE) 0 – 1 ANGLE 1 ANGLE 2 ANGLE 3 ANGLE 4 ANGLE 5 – – – – – – 0 – 1 HALF OPEN (CD insertion) – 0 – 1 FULL OPEN (DVD insertion) AVIC-D1/UC...
  • Page 262 • In case of a CD/DVD error (including reversed disc), the corresponding error message is displayed so that each error condition can be recognized. • An alarm tone is sound to notify sliding disabled conditions when sliding operation becomes disabled. AVIC-D1/UC...
  • Page 263 5. FUNCTION CHART AVIC-D1/UC...

  • Page 264: Operational Flow Chart

    If SOURCE ON, M SWACPW out ASENBO out IPPW out dalmon out CCON out 24ms DRAMPW out SYSRST out 64ms IRQPW out CPUWDT in rst# in 100ms Waiting to 100ms after SYSRST ON. xccstby in Waiting to 1ms after rst# ON. AVIC-D1/UC...
  • Page 265 IDLE STOP ACC OFF STAND-BY TASK OFF chattering : 8ms to 10ms 3 seconds OURCE ON, MUTEVOL release. Dropped down after waiting for 500µs. (Guarantee time as the SDRAM back up.) AVIC-D1/UC...

  • Page 266: Operations

    - side of it to ings is displayed. If you press this button while in decrease the volume. the audio operation screen, the screen changes to the Navigation map screen. AVIC-D1/UC...
  • Page 267 When the XM tuner (GEX-P10XMT) is not connected: Not used. (12) P.ADJ/B.LIGHT button Press to enter the PICTURE ADJUST mode. Press and hold to turn off the back light of the LCD panel. To turn on the back light, press this button again. AVIC-D1/UC...

  • Page 268: Adjusting The Volume

    Turning the Unit On and Select- External unit refers to a Pioneer product (such as one available in the future) that, although ing a Source incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit.
  • Page 269 Insert a CD into the CD loading slot. If you insert a CD, the LCD panel closes auto- matically, and then format reading will start. Make sure the CD loading slot is empty before inserting a CD into the slot. AVIC-D1/UC...

  • Page 270: Ejecting The Dvd Map Disc

    The adjusted angle of the LCD panel will disc, and check the disc for damage be memorized and the LCD panel will auto- before inserting the disc again. matically return to this angle the next time the turning of the ignition switch (ACC) on. AVIC-D1/UC...
  • Page 271 - Connection diagram AVIC-D1/UC...
  • Page 272 AVIC-D1/UC...
  • Page 273 AVIC-D1/UC...
  • Page 274 AVIC-D1/UC...
  • Page 275 Press the RESET button on this product using a pointed object such as the tip of a pen. 4. Enter the following settings: 2 Make any necessary installation angle adjustments. 4 Set the time and language. After installing this product, be sure to check in a safe place, that the vehicle is per- forming normally. AVIC-D1/UC...
  • Page 276 Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned Cleaning tools DVD, CD pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 Portions to be cleaned Cleaning tools Fans Cleaning paper : GED-008 AVIC-D1/UC...

Table of Contents