Hookup And Settings; Rear Panel; Connecting To The Aerial - NEC NDH-160 Owner's Manual

Hookup and Settings

a b c d
i j k l
a AERIAL
Connect the aerial to this terminal.
b AUDIO OUT (Left/Right)
Connect to a TV with audio inputs.
c VIDEO OUT
Connect to a TV with video inputs.
d COMPONENT VIDEO OUT/PROGRESSIVE
SCAN (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
e S-VIDEO OUT
Connect to a S-Video Input on TV.
f OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
g Cooling fan
h AC Power Cord
Plug into the power source.
i RF. OUT
Passes the signal from the AERIAL to your
TV/monitor

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
e f
j AUDIO IN 1 (Left/Right)
Connect the audio output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
k VIDEO IN 1
Connect the video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
l COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
Aerial

Rear Panel

g h
Rear of TV
SCART INPUT
ANTENNA
AUDIO INPUT
INPUT
R
L
R
Rear of the recorder
VIDEO
INPUT
11