Table of Contents
Advertisement
Registration
Code
Registering the
Handset to the
DECT System
Selecting the
DECT System
20 Menu: System
The handset can be operated with a maximum of 10 DECT
systems. Before you can make a call via the DECT system, the
handset has to be registered to the respective system. A sys-
tem ID and registration code may be necessary for the registra-
tion process. Ask the respective system administrator for the
valid registration code. When the handset is not yet subscribed
to the system the display is showing "No subscription".
All settings in this chapter are started by pressing the softkeys:
System
Menu
Then select...
Subscription
PIN (Authentication code)
OK
F
F
Local phone number
The following entries must be made when logging on:
Enter PARK
Enter Auth.Code
Enter System Name
Enter Local Number
Subscription
Select
OK
If the handset has been registered to several DECT systems,
then you can select which one the handset is to use. Select the
system via the arrow keys before confirming "Select". By
choosing
Options
disabled. The selected system is shown in the idle display.
OK
OK
Options New
System name
OK
F
OK
: a system ID should only be entered
if you are at a location where two
DECT systems overlap. If only one
DECT system is available, then just
press
OK
.
: this code is used to register the
handset (authentication code). The
DECT System supplies this code.
: give the name of the DECT system
to which you are registering. This
will be shown on the idle display.
For information concerning the
entry of characters, refer to "Enter-
ing Characters / Names".
: the phone number, assigned to
your DECT handset can be entered
here (ask your system administra-
tor for the phone number).
OK
select a System
Select
, the function automatic search is
/
OK
PARK
F
OK
Options
39
Advertisement
Table of Contents
