7.1.2 DISASSEMBLY
-
Removing the Case (not shown)
1. Remove the Case.
-
Removing the MD Mechanism Module (Fig.1)
Remove the four screws.
Disconnect the connector and then remove the MD
Mechanism Module.
-
Removing the Grille Panel Assy (Fig.1)
Remove the two screws and then remove the
Grille Panel Assy.
-
Removing the Tuner Amp Unit (Fig.2)
Remove the two screws.
Straight the tabs at three locations indicated.
Remove the screw.
Remove the three screws and then remove
the Tuner Amp Unit.
MEH-P7300R,P7350
MD Mechanism Module
Grille Panel Assy
Tuner Amp Unit
Fig.1
Fig.2
71