Cooking In One Stage; Cooking In Two Stages - NEC N230S Operating Instructions Manual

Nec electronics america operating instructions microwave oven n230s
Table of Contents

Advertisement

COOKING IN ONE STAGE

1. Touch POWER pad.
(Select desired power level.)
POWER
x6
2. Touch the number pads for the cooking time.
3. Touch START pad.
When you touch START pad, the M/W indicator starts blinking to show the oven is cooking.
The display counts down the time to show how much cooking time is left. When the cooking time
ends, you will hear 3 beeps.
NOTE: Using lower power levels increases the cooking time which is recommended for foods such
as cheese, milk and slow cooking of meats.

COOKING IN TWO STAGES

All recipes require frozen foods to be defrosted fully before cooking.
This oven can be programmed to automatically defrost foods before cooking.
1. Touch DEFROST pad.
DEFROST
2. Touch number pads for the defrosting time you want.
3.Touch POWER LEVEL pad.
POWER
(Select desired power level.)
LEVEL
x6
4. Touch number pads for desired cooking time.
5. Touch START pad.
When you touch START pad, the DEFROST and M/W indicators come on to confirm the power levels
selected. The DEFROST indicator starts blinking to show you that the oven is in DEFROST mode.
The display counts down the time remaining in DEFROST mode.
When the oven beeps, turn over, break apart and/or redistribute the food. At the end of DEFROST
mode, the oven will beep and start M/W cook. The DEFROST indicator goes off and the M/W
indicator starts blinking. The display counts down the time remaining in M/W cook.
When M/W cook ends, you will hear 3 beeps.
The M/W indicator lights.
The display will show what you touched.
NOTE: If step is omitted the oven will
cook at full power.
This example shows power level 5.
The display will show the numbers you
pressed in the order you touched.
NOTE: Your oven can be programmed
for 99 minutes 99
seconds.(99:99)
The DEFROST indicator lights and " : 0" is
displayed.
The display will show the numbers you
pressed in the order you touched.
The M/W indicator lights and 'P-HI will be
displayed. This example shows power
level 5
The display will show the number you
pressed in the order you touched.
9 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents