Intended Use; Technical Data; Declaration Of Conformity - Bosch GAS 20 L SFC Professional Original Instructions Manual

OBJ_BUCH-1321-006.book Page 11 Tuesday, July 29, 2014 11:53 AM
Symbol Meaning
Apply strength for the workstep.
Switching On
Switching Off
Remote automatic switching
Prohibited action
Permitted action
Next step of action
P Rated power input
1
f Frequency
Container volume (gross)
Net volume
Vacuum, max.
Airflow, max.
Suction capacity
Surface of folded filter
Dust filter category of vacuum cleaner
L
Degree of protection
Symbol for protection class I
/I
(with protective conductor)
Weight according to
EPTA-Procedure 01/2003
BIA test certificate number for
filter/vacuum cleaner
L Sound pressure level
pA
K Uncertainty
Delivery Scope
All-Purpose Vacuum Cleaner (see figure 1)
A complete overview of accessories can be found in our ac-
cessories program.
Bosch Power Tools

Intended Use

The vacuum cleaner is intended for vacuuming and extraction
of materials that are not hazardous to one's health and for
non-flammable liquids. It is suitable for the increased de-
mands of industrial usage, as required in trades, industry and
workshops.
According to IEC/EN 60335-2-69, vacuum cleaners of dust
category L may only be used for vacuuming and extraction of
hazardous dusts with an exposition limit value > 1 mg/m
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
The vacuum cleaner has a blower function, e. g. for drying sur-
faces.
The vacuum cleaner has a socket outlet with remote automat-
ic switching for connection of a power tool with extraction
function.
The vacuum cleaner may generally not be used in rooms
where the danger of an explosion exists.

Technical Data

The technical data of the machine are listed in the table on
page 176.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60335-1, EN 60335-2-69.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 29.07.2014
Noise Information
The measured values of the machine are listed in the table on
page 176.
Sound emission values determined according to
EN 60335-2-69.
English | 11
3
.
1 609 92A 0X8 | (29.7.14)